A Sliding Mode Control with a PID Sliding Surface for Power Output Maximizing of a Wind Turbine
DOI:
https://doi.org/10.37591/joci.v1i1-2-3.3067Abstract
The wind energy has many advantages, it does not pollute and it is an inexhaustible source. However, the
cost of this energy is still too high to compete with traditional fossil fuels, especially on the less windy sites.
The performance of a wind turbine depends mainly on three parameters: the power of the wind, the power
curve of the turbine and the generator’s ability to respond to the wind fluctuations. This article proposes a
robust control of a double-fed induction generator of wind turbine to optimize its production that means the
energy quality and efficiency. The proposed control reposes in the sliding mode approach using a PID
sliding surface, which contributes to the minimization of the static error and the number of the derivative
functions. Simulation results show good performances of this control.
Keywords: Sliding mode control, chattering phenomenon, PID controller, wind turbine
Downloads
Published
Issue
Section
License
Journal Title:
Title of the Paper:
Corresponding Author’s Information:
Name: Address:
E-mail:
Contact Number:
It is herein agreed that: The copyright to the above-listed unpublished and original article is transferred to STM Journals.
This copyright transfer covers the exclusive right to reproduce and distribute the contribution, including reprints, translations, photographic reproductions, microform, electronic form (offline, online), or any other reproductions of similar nature.
I/We declare that above manuscript is not published already in part or whole (except in the form of abstract) in any journal or magazine for private or public circulation, and, is not under consideration of publication elsewhere.
I/ We warrant(s) that his/her/their contribution is original, except for such excerpts from copyrighted works as may be included with the permission of the copyright holder and author thereof, that it contains no libelous statements, and does not infringe on any copyright, trademark, patent, statutory right, or propriety right of others.
I/We will not publish his/her/their above said contribution anywhere else without the prior written permission of the publisher unless it has been changed substantially. I/We also agree to the authorship of the article in the following order: Author(s) Name Signature(s)
1. ________________
2. ________________
3. ________________
4. ________________
The author(s) agree to the terms of this Copyright Notice, which will apply to this submission if and when it is published by this journal (comments if any to the editor can be added below).
