Smart Jacket for Health Monitoring and Controlling

Authors

  • N. Dinesh Kumar Head of Department, Electronics and Communication Engineering, Vignan Institute of Technology and Science, Deshmukhi(v), Yadadri Bhuvanagiri, Telangana http://orcid.org/0000-0002-0248-8789
  • K. Sreenija Student, Department of Electronics and Communication Engineering, Vignan Institute of Technology and Science, Deshmukhi(v), Yadadri Bhuvanagiri, Telangana
  • S. Phaneeshwar Bala Subramanyam Student, Department of Electronics and Communication Engineering, Vignan Institute of Technology and Science, Deshmukhi(v), Yadadri Bhuvanagiri, Telangana
  • M. Harshasri Vishnu Sai Student, Department of Electronics and Communication Engineering, Vignan Institute of Technology and Science, Deshmukhi(v), Yadadri Bhuvanagiri, Telangana

Abstract

Due to drastic changes in climatic conditions, winters are getting much colder, summers are getting much hotter. Uttermost hot or cold conditions are greater threat to health. These circumstances might cause genuine medical problems. At very high temperature most common problem is heart attack and overcooling of body is major problem during extreme colder conditions. As the application of technology has increased in every sector, it has also been introduced in textiles too. Electronics textiles in general referred as smart fabrics are quite trendy now. The main motto of this is to design a smart jacket which aims for providing reliable health during all the climatic conditions and can also sense the temperature using sensors. The major application for smart jacket is that it can be used for soldiers as they are triumph in war. This jacket helps in areas to find the temperature control and health monitoring. These jackets are not only useful for common people, but also to physically challenged people to make their life easier. Consequently for monitoring health and heart rate of body health monitoring apparatus have been established in the jacket as well.

References

Youtube (25th November, 2011)“Climacon Technology- temperature regulated clothing”. [Online] Available from https://www.youtube.com/watch?v=9xVnm9JrDik

Pulse Sensor (2018). “Open Hardware”. [Online] Available from https://pulsesensor.com/pages/open-hardware

Jani Mäntyjärvi, Jyrki Hoisko, Juha Kaario,Jyrki Kimmel. “System and method for smart clothing and wearable electronic devices”. Nokia Corporation, 2004

Pulse Sensor (2011). [Online] Available from http://pulsesensor.com/products/pulse-sensor-amped

Gilsoo Cho. “Smart Clothing: Technology and Applications”. CRC Press- Taylor & Francis Group, 2009.

Electronics Hub (October 17, 2018). “RF Remote Control Circuit for Home Appliances”. [Online] Available from http://www.electronicshub.org/rf-remote-control-circuit-for-home-appliances/

Casey Reas, Ben Fry. Processing: A Programming Handbook for Visual Designers, Second Edition, The MIT Press, 2004.

Alan G. Smith. “Introduction to Arduino: A piece of cake Paperback – 19”August 2011. CreateSpace Independent Publishing Platform.

Arduino cc (20th April 2022). “Liquid Crystal Displays (LCD) with Arduino”[Online]. Available from https://www.arduino.cc/en/Tutorial/LiquidCrystalDisplay

Processing (2022). ‘Tutorials”. [Online] Available from https://processing.org/tutorials/

Downloads

Published

2022-05-17

Issue

Vol. 13 No. 1 (2022)

Section

Articles

License

Journal Title:

Title of the Paper:

Corresponding Author’s Information:

Name: Address:

E-mail:

Contact Number:

It is herein agreed that: The copyright to the above-listed unpublished and original article is transferred to STM Journals.

This copyright transfer covers the exclusive right to reproduce and distribute the contribution, including reprints, translations, photographic reproductions, microform, electronic form (offline, online), or any other reproductions of similar nature.

I/We declare that above manuscript is not published already in part or whole (except in the form of abstract) in any journal or magazine for private or public circulation, and, is not under consideration of publication elsewhere.

 I/ We warrant(s) that his/her/their contribution is original, except for such excerpts from copyrighted works as may be included with the permission of the copyright holder and author thereof, that it contains no libelous statements, and does not infringe on any copyright, trademark, patent, statutory right, or propriety right of others.

I/We will not publish his/her/their above said contribution anywhere else without the prior written permission of the publisher unless it has been changed substantially. I/We also agree to the authorship of the article in the following order: Author(s) Name Signature(s)

1. ________________

2. ________________

3. ________________

4. ________________

The author(s) agree to the terms of this Copyright Notice, which will apply to this submission if and when it is published by this journal (comments if any to the editor can be added below).