Single Point Incremental Forming: A Review

Authors

  • Bhavesh Sonagra Department of Mechanical Engineering, Atmiya Institute of Technology and Science, Rajkot, Gujarat, India
  • Jayendra B. Kanani Kanani
  • Hardik A. Patel

DOI:

https://doi.org/10.3759/joise.v3i2.3515

Abstract

There are many forming processes, being used in the global market for a long time. Many conventional sheet forming processes are tedious and time taking in development and design as well. In order to solve these problems, single point incremental forming (SPIF) is introduced which is a modern method for metal sheet forming, where parts can be formed without the use of dedicated dies. In this review, forming process particularly SPIF is focused to carry out short summary for new researchers who want do work on this process. SPIF is one of the prominent rapid prototyping techniques that enable to make prototypes quickly. This work tends towards reviewing some recent papers for identification of current progress in the respective field.

 

References

Desai BV, Desai KP, Raval HK. Die-less Rapid Prototyping Process: Parametric Investigations. International Conference on Materials Processing and Characterisation, Procedia Material Science. 2014; 6: 666–673p.

Carrino L, Giuliano G, Strano M. The Effect of the Punch Radius in Dieless Incremental Forming. Innovative Production Machines and System (IPROMS). 2006; 204–209p.

León J, Salcedo D, Ciáurriz C, et al. Analysis of the Influence of Geometrical Parameters on the Mechanical Properties of Incremental Sheet Forming Parts. The Manufacturing Engineering Society International Conference. 2013; 445–453p.

Kurra S, Khan A, Srinivasa PR. Tool Path Definition for Numerical Simulation of Single Point Incremental Forming. International Conference on Design and Manufacturing. 2013; 64: 536–545p.

Pandivelan C, Jeevanantham AK. Formability Evaluation of AA 6061 Alloy Sheets on Single Point Incremental Forming using CNC Vertical Milling Machine. J Mater Environ Sci. 2015; 6(5): 1343–1353p.

Thakur R, Kumar N. Optimization of Surface Roughness and Improving Profile Accuracy in SPIF (Single Point Incremental Forming) Process. International Journal of Current Engineering and Technology (IJCET). 2015; 5(3): 2048–2052p.

Sundarasrinivasan A, Ganesh P. Experimental Study of Incremental Forming in Stainless-Steel (AISI 316) for a Truncated Pyramid Shape. International Conference on Recent Advancement in Mechanical Engineering & Technology. 2015; 9: 454–462p.

Ham M, Jeswiet J. Single Point Incremental Forming and the Forming Criteria for AA3003. CIRP Annals. 2006; 55/1/2006.

Micari F, Ambrogio G, Filice L. Shape and Dimensional Accuracy in Single Point Incremental Forming: State of the Art and Future Trends. J Mater Process Technol. 2007; 191: 390–395p.

Hamilton K, Jeswiet J. Single Point Incremental Forming at High Feed Rates and Rotational Speeds: Surface and Structural Consequences. CIRP Ann Manuf Technol. 2010; 59: 311–314p.

Allwooda J, Braunb D, Musica O. The Effect of Partially Cut-Out Blanks on Geometric Accuracy in Incremental Sheet Forming. J Mater Process Technol. 2010; 1501–1510p.

Downloads

Published

2019-11-18

Issue

Vol. 3 No. 2 (2016)

Section

Articles

License

Declaration and Copyright Transfer Form

(to be completed by authors)

I/ We, the undersigned author(s) of the submitted manuscript, hereby declare, that the above manuscript which is submitted for publication in the STM Journals(s), is not published already in part or whole (except in the form of abstract) in any journal or magazine for private or public circulation, and, is not under consideration of publication elsewhere.

  • I/We will not withdraw the manuscript after 1 week of submission as I have read the Author Guidelines and will adhere to the guidelines.
  • I/We Author(s ) have niether given nor will give this manuscript elsewhere for publishing after submitting in STM Journal(s).
  • I/ We have read the original version of the manuscript and am/ are responsible for the thought contents embodied in it. The work dealt in the manuscript is my/ our own, and my/ our individual contribution to this work is significant enough to qualify for authorship.
  •  I/We also agree to the authorship of the article in the following order:

Author’s name                                    

 

1. ________________

2. ________________

3. ________________

4. ________________

 

We  Author(s) tick this box and would request you to consider it as our signature as we agree to the terms of this Copyright Notice, which will apply to this submission if and when it is published by this journal.