Reliability Evaluation of Hose Reel System– A Practical Approach

Authors

  • Aditya Tiwary Department of Fire Tech. & Safety Engg., IPS Academy, IES
  • Praveen Patel Department of Fire Tech. & Safety Engg., IPS Academy, IES

Keywords:

Reliability, Availability, Hose Reel system, Safety, Failure Rate.

Abstract

Reliability evaluation of a system or component or element is very important in order to predict its availability and other relevant indices. Reliability is the parameter which tells about the availability of the system under proper working conditions for a given period of time. In this paper reliability evaluation of a practical Hose Reel system is evaluated and different parameter are calculated. A practical Hose Reel system installed for the safety purpose of the educational institute was taken for study.

Author Biographies

  • Aditya Tiwary, Department of Fire Tech. & Safety Engg., IPS Academy, IES
    Associate Professor, Department of Fire Tech. & Safety Engg., IPS Academy, IES, Indore, India
  • Praveen Patel, Department of Fire Tech. & Safety Engg., IPS Academy, IES
    Professor, Department of Fire Tech. & Safety Engg., IPS Academy, IES, Indore, India

References

Singh C. Markov cut-set approach for the reliability evaluation of transmission and distribution systems. IEEE Trans. on Power Apparatus and Systems. 1981; 100(6): 2719-25p.

Billinton R. Composite system reliability evaluation. IEEE Trans. on Power Apparatus and Systems.1969; 88(4): 276-81p.

Wojczynski E., Billinton R. Effects of distribution system reliability index distributions upon interruption cost/reliability worth estimates. IEEE Trans. on Power Apparatus and Systems. 1985; 104(11); 3229-35p.

Verma A. K., Srividya A., Kumar H. M. R. A framework using uncertainties in the composite power system reliability evaluation. Electric Power Components and Systems.2002; 30(7): 679-91p.

Zheng Z., Cui L., Hawkes A. G. A study on a single-unit Markov repairable system with repair time omission. IEEE Trans. on Reliability. 2006; 55(2): 182-8p.

Jirutitijaroen P., Singh C. Comparison of simulation methods for power system reliability indexes and their distributions. IEEE Trans. on Power Systems. 2008; 23(2): 486-93p.

Dzobe O., Gaunt C. T., Herman R. Investigating the use of probability distribution functions in reliability-worth analysis of electric power systems. Int. J. of Electrical Power and Energy Systems. 2012; 37: 110-6p.

Bae I. S., Kim J. O. Reliability evaluation of customers in a microgrid. IEEE Trans. on Power Systems.2008; 23(3): 1416-22p.

Billinton R., Wang P. Reliability-network-equivalent approach to distribution-system-reliability evaluation. IEE Proc. generation, transmission and distribution. 1998; 145(2): 149-53p.

Arya L. D., Choube S. C., Arya R. et al. Evaluation of Reliability indices accounting omission of random repair time for distribution systems using Monte Carlo simulation. Int. J. of Electrical Power and Energy System. 2012; 42: 533-41p.

Tiwary A., Arya R., Choube S. C. et al. Determination of Optimum period between Inspections for Distribution system based on Availability Accounting Uncertainties in Inspection Time and Repair Time. Journal of The Institution of Engineers (India): series B. 2012; 93(2): 67-72p.

Jirutitijaroen P, Singh C. Comparison of simulation methods for power system reliability indexes and their distribution. IEEE Trans Power Syst. 2008; 23(2): 486–92p.

Tiwary A., Arya R., Choube S. C. et al. Determination of reliability indices for distribution system using a state transition sampling technique accounting random down time omission. Journal of The Institution of Engineers (India): series B. 2013; 94(1): 71-83p.

Tiwary A., Arya L. D., Arya R. et al. Inspection repair based availability optimization of distribution systems using Teaching Learning based Optimization. Journal of The Institution of Engineers (India): series B. 2016; 97(3): 355-65p.

Tiwary A., Arya R., Arya L. D. et al. Bootstrapping based technique for evaluating reliability indices of RBTS distribution system neglecting random down time. The IUP Journal of Electrical and Electronics Engineering. 2017; X(2): 48-57p.

Volkanavski, Cepin M, Mavko B. Application of fault tree analysis for assessment of the power system reliability. Reliab Eng Syst Safety. 2009; 94(6):1116–27p.

Li B M, Su C T, Shen C L. The impact of covered overhead conductors on distribution reliability and safety. Int J Electr Power Energy Syst. 2010; 32(4): 281–9p.

Tiwary A. Reliability enhancement of distribution system using Teaching Learning based optimization considering customer and energy based indices. International Journal on Future Revolution in Computer Science & Communication Engineering. 2017; 3(10): 58-62p.

Tiwary A. Self-Adaptive Multi-Population Jaya Algorithm based Reactive Power Reserve Optimization Considering Voltage Stability Margin Constraints. International Journal on Future Revolution in Computer Science & Communication Engineering. 2018; 4(1): 341-45p.

Arya R., Tiwary A., Choube S. C. et al. A smooth bootstrapping based technique for evaluating distribution system reliability indices neglecting random interruption duration. Int. J. of Electrical Power and Energy System. 2013; 51: 307-10p.

Sarantakos I., Greenwood D. M., Yi J. et al. A method to include component condition and substation reliability into distribution system reconfiguration. Int. J. of Electrical Power and Energy System. 2019; 109: 122-38p.

Battu N. R., Abhyankar A. R., Senroy N. Reliability Compliant Distribution System Planning Using Monte Carlo Simulation. Electric power components and systems. 2019; 47: 985-97p.

Downloads

Published

2020-09-23

Issue

Vol. 7 No. 2 (2020)

Section

Research Article

License

Declaration and Copyright Transfer Form

(to be completed by authors)

I/ We, the undersigned author(s) of the submitted manuscript, hereby declare, that the above manuscript which is submitted for publication in the STM Journals(s), is not published already in part or whole (except in the form of abstract) in any journal or magazine for private or public circulation, and, is not under consideration of publication elsewhere.

  • I/We will not withdraw the manuscript after 1 week of submission as I have read the Author Guidelines and will adhere to the guidelines.
  • I/We Author(s ) have niether given nor will give this manuscript elsewhere for publishing after submitting in STM Journal(s).
  • I/ We have read the original version of the manuscript and am/ are responsible for the thought contents embodied in it. The work dealt in the manuscript is my/ our own, and my/ our individual contribution to this work is significant enough to qualify for authorship.
  •  I/We also agree to the authorship of the article in the following order:

Author’s name                                    

 

1. ________________

2. ________________

3. ________________

4. ________________

 

We  Author(s) tick this box and would request you to consider it as our signature as we agree to the terms of this Copyright Notice, which will apply to this submission if and when it is published by this journal.