Design, Fabrication and Testing of Safety Valve Vent Silencer with Cyclone Separator for Industrial Applications

Authors

  • Kumaresan T
  • B. Arthy
  • V. Mohan Sivakumar

Abstract

The aim of this research work is to safeguard the infill materials, which is used inside the safety valve vent silencer. This research will help the infill materials from the wet steam and increases the life of the infill materials. The main parts of the research project are the cyclone chamber, center pipe. This cyclone separator drains the condensate through the lower part of the silencer and the steam releases vertically top side direction. The working Principle of this Cyclone separator is completely founded on “Centrifugal Force” procedure. Because of the centrifugal force the dry steam releases vertically upwards and the dry steam which is smidgen weighted than dry Steam so consequently it is released through channel pipe.

Keywords: Cyclone separator, safety valve, pressure, silencer, noise

Downloads

Published

2021-05-24

Issue

Vol. 8 No. 1 (2021)

Section

Research Article

License

Declaration and Copyright Transfer Form

(to be completed by authors)

I/ We, the undersigned author(s) of the submitted manuscript, hereby declare, that the above manuscript which is submitted for publication in the STM Journals(s), is not published already in part or whole (except in the form of abstract) in any journal or magazine for private or public circulation, and, is not under consideration of publication elsewhere.

  • I/We will not withdraw the manuscript after 1 week of submission as I have read the Author Guidelines and will adhere to the guidelines.
  • I/We Author(s ) have niether given nor will give this manuscript elsewhere for publishing after submitting in STM Journal(s).
  • I/ We have read the original version of the manuscript and am/ are responsible for the thought contents embodied in it. The work dealt in the manuscript is my/ our own, and my/ our individual contribution to this work is significant enough to qualify for authorship.
  •  I/We also agree to the authorship of the article in the following order:

Author’s name                                    

 

1. ________________

2. ________________

3. ________________

4. ________________

 

We  Author(s) tick this box and would request you to consider it as our signature as we agree to the terms of this Copyright Notice, which will apply to this submission if and when it is published by this journal.