Open Access
Subscription or Fee Access
Estimation of Reliability and various parameters of a Radial Electrical Distribution System: An Innovative Safety Approach
Abstract
Reliability assessment of an engineering system or systems or component or element is very important in order to forecast its availability or unavailability and other important indices related to the component or system as a whole. Reliability is the floating which tells about the availability or unavailability of the component under proper working conditions for a given period of time. A lot many research papers have been reported for reliability analysis of distribution system and transmission system. Monte Carlo simulation has been used to evaluate the modified reliability indices for radial and meshed distribution system. Strap bootstrapping technique was also used to obtain the reliability and its different parameters in literature. Customer based evaluation of the reliability was also carried out for the distribution system under study. Different optimization techniques such as particle swarm optimization, differential evolution, teaching learning based optimization and many more were also outlined in papers for analysis of various reliability parameters. In view of above, in this paper a study based on reliability analysis of an electrical distribution system is obtained. Various parameters related to reliability such as mean time to failure and reliability of each and every component of the distribution system is been obtained. Various parameters obtained along with the magnitude are also shown in the result section. The electrical distribution system taken for study is radial distribution system from the literature.
Keywords
References
R. N. Allan, E. N. Dialynas, I. R. Homer. (1979). Modelling and evaluating the reliability of distribution systems. IEEE Trans. on Power Apparatus and Systems, 98: 2181-2189.
E. Wojczynski, R. Billinton. (1985). Effects of distribution system reliability index distributions upon interruption cost/reliability worth estimates. IEEE Trans. on Power Apparatus and Systems, 11: 3229-3235.
A. K. Verma, A. Srividya, H. M. R. Kumar. (2002). A framework using uncertainties in the composite power system reliability evaluation. Electric Power Components and Systems, 30: 679-691.
Z. Zheng, L. Cui, Alan G. Hawkes. (2006). A study on a single-unit Markov repairable system with repair time omission. IEEE Trans. on Reliability, 55: 182-188.
P. Jirutitijaroen, C. singh. (2008). Comparison of simulation methods for power system reliability indexes and their distributions. IEEE Trans. on Power Systems, 23: 486-493.
O. Dzobe, C. T. Gaunt, R. Herman. (2012). Investigating the use of probability distribution functions in reliability-worth analysis of electric power systems. Int. J. of Electrical Power and Energy Systems, 37: 110-116.
I. S. Bae, J. O. Kim. (2008). Reliability evaluation of customers in a microgrid. IEEE Trans. on Power Systems, 23: 1416-1422.
R. Billinton, P. Wang. (1998). Reliability-network-equivalent approach to distribution-system-reliability evaluation. IEE Proc. generation, transmission and distribution, 145: 149-153.
S. Bhowmik, S. K. Goswami, P. K. Bhattacherjee. (2000). A New power distribution system planning through reliability evaluation technique. Electric Power Systems Research, 54: 169-179.
C. Singh. (1981). Markov cut-set approach for the reliability evaluation of transmission and distribution systems. IEEE Trans. on Power Apparatus and Systems, 100: 2719-2725.
R. Billinton. (1969). Composite system reliability evaluation. IEEE Trans. on Power Apparatus and Systems, 88: 276-281.
P. Jirutitijaroen, C. singh. (2008). Comparison of simulation methods for power system reliability indexes and their distributions. IEEE Trans. on Power Systems, 23: 486-493.
A. Tiwary. (2017). Customer and energy based indices consideration for reliability enhancement of distribution system using Improved Teaching Learning based optimization. International Journal of Latest Trends in Engineering and Technology, 9: 254-258.
Aditya Tiwary. (2018). An Innovative Self-Adaptive Multi-Population Jaya Algorithm based Technique for Evaluation and Improvement of Reliability Indices of Electrical Power Distribution System. International Journal on Future Revolution in Computer Science & Communication Engineering, 4: 299-302.
Jirutitijaroen P, singh C. (2008). Comparison of simulation methods for power system reliability indexes and their distribution. IEEE Trans Power Syst, 23: 486–92.
Aditya Tiwary, R. Arya, S. C. Choube and L. D. Arya. (2013). Determination of reliability indices for distribution system using a state transition sampling technique accounting random down time omission. Journal of The Institution of Engineers (India): series B (Springer), 94: 71-83.
A. Tiwary. (2019). Inspection-Repair-Based Availability Optimization of Distribution System Using Bare Bones Particle Swarm Optimization. Chapter in Book Series Computational Intelligence: Theories, Applications and Future Directions – Volume II, Advances in Intelligent Systems and computing, 799.
Aditya Tiwary, R. Arya, L. D. Arya, S. C. Choube. (2017). Bootstrapping based technique for evaluating reliability indices of RBTS distribution system neglecting random down time. The IUP Journal of Electrical and Electronics Engineering, X: 48-57.
Volkanavski, Cepin M, Mavko B. (2009). Application of fault tree analysis for assessment of the power system reliability. ReliabEngSyst Safety, 94: 1116-27.
Li BM, Su CT, Shen CL. (1989). The impact of covered overhead conductors on distribution reliability and safety. Int J Electr Power Energy Syst, 32: 281–9.
Aditya Tiwary. (2017). Reliability enhancement of distribution system using Teaching Learning based optimization considering customer and energy based indices. International Journal on Future Revolution in Computer Science & Communication Engineering, 3: 58-62.
A. Tiwary. (2018). Self-Adaptive Multi-Population Jaya Algorithm based Reactive Power Reserve Optimization Considering Voltage Stability Margin Constraints. International Journal on Future Revolution in Computer Science & Communication Engineering, 4: 341-345.
R. Arya, A. Tiwary , S. C. Choube, L. D. Arya. (2013). A smooth bootstrapping based technique for evaluating distribution system reliability indices neglecting random interruption duration. Int. J. of Electrical Power and Energy System, 51: 307-310.
A. Tiwary. (2018). Inspection–Maintenance-Based Availability Optimization of Feeder Section Using Particle Swarm optimization. Soft Computing for Problem Solving-Advances in Intelligent Systems and Computing, 816: 257-272.
M. Bin Li, C. Tzong Su, C. Lung Shen. (2010). The impact of covered overhead conductors on distribution reliability and safety. Int. J. of Electrical Power and Energy System, 32: 281-289.
Aditya Tiwary. (2019). Reliability evaluation of radial distribution system – A case study. Int. J. of Reliability: Theory and Applications, 14, 4(55): 9-13.
I. Sarantakos, D. M. Greenwood, J. Yi, S. R. Blake, P. C. Taylor. (2019). A method to include component condition and substation reliability into distribution system reconfiguration. Int. J. of Electrical Power and Energy System, 109: 122-138.
Aditya Tiwary. (2020). Customer orientated indices and reliability evaluation of meshed power distribution system. Int. J. of Reliability: Theory and Applications, 15, 1(56):10-19.
A. Tiwary, P. Patel. (2020). Reliability Evaluation of Hose Reel System - A Practical Approach. Journal of Industrial Safety Engineering, 7: 30-34.
N. R. Battu, A. R. Abhyankar, N. Senroy. (2019). Reliability Compliant Distribution System Planning Using Monte Carlo Simulation. Electric power components and systems, 47: 985-997.
Aditya Tiwary. (2020). Application of Non-Parametric Bootstrap Technique for evaluating MTTF and Reliability of a Complex Network with Non-Identical Component Failure Laws. Reliability: Theory and Applications, 15: 62-69.
Aditya Tiwary, Swati Tiwary. (2020). Evaluation of Customer Orientated Indices and Reliability Study of Electrical Feeder System. Reliability: Theory and Applications, 15: 36-43.
Aditya Tiwary, Ritik Yadav, Praveen R. Patel, Praveen K. Patel, Satish Patle, Rahul Gurjar, Shivam Dabli, “An Innovative Safety Approach for Reliability Analysis of Hose Reel System”, International Journal of Innovative Science and Research Technology, Vol. 5, No, 10, Oct. 2020, pp. 870-873.
Aditya Tiwary and Swati Tiwary, “Evaluation of Reliability Indices of Roy Billinton Test System (RBTS) Bus-2 Distribution System for Educational Purpose”, Reliability: Theory and Applications, Vol. 16, No. 1(61), March 2021, pp. 54-61.
Aditya Tiwary, Ritik Yadav, Praveen R. Patel, Praveen K. Patel, Satish Patle, Rahul Gurjar, Shivam Dabli, Shailendra Raghuwanshi “Reliability Assessment of Practical Hose Reel System a contemporary Perspective”, International Journal of Innovative Science and Research Technology, Vol. 6, No. 3, March 2021, pp. 1318-1321.
Aditya Tiwary, Saiyam Jain, Shivam Rathore, Seejan Khan, Rohit Patel, Shreyansh Jain, Sagar Soni, Sami Shaikh, “Reliability Evaluation of Fire Extinguisher - An Innovative Safety Approach”, International Journal of Innovative Science and Research Technology, Vol. 6, No. 5, May 2021, pp. 244-247.
Aditya Tiwary and Swati Tiwary, “An Innovative Methodology for Evaluation of Reliability Indices of Electric Traction System”, Reliability: Theory and Applications, Vol. 16, No. 2(62), June 2021, pp. 13-21.
L. D. Arya, S. C. Choube, R. Arya and Aditya Tiwary, “Evaluation of Reliability indices accounting omission of random repair time for distribution systems using Monte Carlo simulation”, Int. J. of Electrical Power and Energy System, (ELSEVIER), Vol. 42, 2012, pp. 533-541.
Refbacks
- There are currently no refbacks.