Effect of Process Parameters of Pulsed Current Micro Plasma Arc Welding on Weld Pool Geometry of AISI 304L Stainless Steel Sheets

Authors

  • Dr. Kondapalli Siva Prasad Professor, Mechanical Engineering, Anil Neerukonda Institute of Technology and Sciences, Visakapatnam
  • Chalamalasetti Srinivasa Rao Andhra University, Visakhapatnam, India
  • Damera Nageswara Rao Centurion University of Technology & Management, Odissa, India

Keywords:

Pulsed current, Micro plasma arc welding, AISI 304L stainless steel, Wel pool geometry, ANOVA

Abstract

AISI 304L stainless steel is an austenitic Chromium-Nickel stainless steel offering an optimum combination of corrosion resistance, strength, and ductility. These attributes make it a favorite for many mechanical components. The low carbon content reduces susceptibility to carbide precipitation during welding. The effects of pulsing current parameters on weld pool geometry namely front width, back width, front height, and back height of pulsed current micro plasma arc-welded AISI 304L stainless steel sheets were analyzed. Four factors, five levels, and central composite design were used to develop mathematical models, incorporating pulsed current parameters and weld pool geometry. The mathematical models have been developed by Response Surface Method. The adequacy of the models was checked by analysis of variance technique. By using the developed mathematical models, weld pool geometry parameters can be predicted.

Author Biographies

  • Dr. Kondapalli Siva Prasad, Professor, Mechanical Engineering, Anil Neerukonda Institute of Technology and Sciences, Visakapatnam

     Professor,
    Mechanical Engineering,
    Anil Neerukonda Institute of Technology and Sciences,
    Visakapatnam

  • Chalamalasetti Srinivasa Rao, Andhra University, Visakhapatnam, India
    Assocaite Professor, Department of Mechanical Engineering
  • Damera Nageswara Rao, Centurion University of Technology & Management, Odissa, India
    Vice Chancellor

Downloads

Published

2019-04-17

Issue

Vol. 2 No. 1-3 (2012)

Section

Articles

License

Declaration and Copyright Transfer Form

(to be completed by authors)

I/ We, the undersigned author(s) of the submitted manuscript, hereby declare, that the above manuscript which is submitted for publication in the STM Journals(s), is not published already in part or whole (except in the form of abstract) in any journal or magazine for private or public circulation, and, is not under consideration of publication elsewhere.

  • I/We will not withdraw the manuscript after 1 week of submission as I have read the Author Guidelines and will adhere to the guidelines.
  • I/We Author(s ) have niether given nor will give this manuscript elsewhere for publishing after submitting in STM Journal(s).
  • I/ We have read the original version of the manuscript and am/ are responsible for the thought contents embodied in it. The work dealt in the manuscript is my/ our own, and my/ our individual contribution to this work is significant enough to qualify for authorship.
  •  I/We also agree to the authorship of the article in the following order:

Author’s name                                    

 

1. ________________

2. ________________

3. ________________

4. ________________

 

We  Author(s) tick this box and would request you to consider it as our signature as we agree to the terms of this Copyright Notice, which will apply to this submission if and when it is published by this journal.