Origins of Several Foam Ample Forms in Materials Science

Authors

  • R. N. Chakraborty Ex-Assistant Professor, Department of Metallurgical Engineering, RVS College of Engineering and Technology, Jamshedpur, Jharkhand, INDIA
  • B. Goswami Ex-Assistant Professor, Department of Metallurgical Engineering, RVS College of Engineering and Technology, Jamshedpur, Jharkhand, India

Keywords:

Foam, Polymer, Ceramics, Organic, Visco-plastic

Abstract

Foam culture refers to the light weight philosophy for the additional subject released from appropriate specific performance in relation to the environment. Regular study has been done to actualize the subject required under ballistic strength of degeneration issues. The cases studied in this article were from polymer functional ceramic issues as well as originating flexible regions. Though, water-purification areas on the coast have origins Ni-nano that uses carbon-tubed analogs to subsidize sun radiation energy for evaporation, where Ni-foam has adsorbed-in-dispersion symbols. Thus closed and open porous matter constructs are purchased from typed organo-compos, where crystalline clearance is as usual or by origin from organics. Couple polymeric re-entrant foam, classified hyper-elastic and visco-plastic as a substance to react to time-dependent relaxation.

References

Liting Zhang, Tao Zhuang, XianmingZeng, FengRen, Xiangyu Liu, Jiawei Sun, Ying Zhang, Evaluation of Polyimide Foam Material Applied in Scientific Investigation Ship, 2019 IOP Conf. Ser.: Mater. Sci. Eng. 493 012160

Shuang Han, Jing Yang, Xiaofeng Li, Wei Li, Xintao Zhang, Nikhil Koratkar, Zhong-Zhen Yu, Flame Synthesis of Superhydrophilic Carbon Nanotubes/Ni Foam Decorated with Fe2O3 Nanoparticles for Water Purification via Solar Steam Generation, ACS Appl. Mater. Interfaces2020, 12, 11,

Joseph T. Muth, Patrick G. Dixon, Logan Woish, Lorna J. Gibson, and Jennifer A. Lewis, Architected cellular ceramics with tailored stiffness via direct foam writing, PNAS February 21, 2017 114 (8) 1832-1837

J.L. Willett, R.L. Shogren; Processing and properties of extruded starch/polymer foams; Polymer 43 (2002) 5935–5947

Kossa, A., Berezvai, Sz., 2016. Visco-hyperelastic Characterization of Polymeric Foam Materials. Materials Today: Proceedings 3, 1003-1008.

Rod Lakes, Foam structures with a negative Poisson's ratio", Science, 235 1038-1040 (1987).

Paweł BOGUSZ, Roman GIELETA, Marcin KONARZEWSKI, Michał STANKIEWICZ; CRUSHING BEHAVIOUR OF THE PVC FOAM LOADED WITH BEATERS OF VARIOUS SHAPES; actamechanica et automatica, vol.12 no.1 (2018)

Chao Wang; Yicheng Wu; Yingchun Li; Qian Shao; Xingru Yan; Cui Han; Zhe Wang; Zhen Liu; ZhanhuGuo; Flame‐retardant rigid polyurethane foam with a phosphorus‐ nitrogen single intumescent flame retardant; PolymAdv Technol. 2018;29:668–676.

M. Cavasin, S. Giannis, M. Salvo, V. Casalegno, M. Sangermano ; Mechanical and thermal characterization of an epoxy foam as thermal layer insulation for a glass fiber reinforced polymer; J. APPL. POLYM. SCI. 2018, DOI: 10.1002/APP.46864

Yeongyoon Kim; Chul B. Park; P. Chen; Russell B. Thompson; "Polymer" volume 54, issue 2. doi:10.1016/j.polymer.2012.11.067.

Downloads

Published

2020-12-24

Issue

Vol. 10 No. 3 (2020)

Section

Articles

License

Declaration and Copyright Transfer Form

(to be completed by authors)

I/ We, the undersigned author(s) of the submitted manuscript, hereby declare, that the above manuscript which is submitted for publication in the STM Journals(s), is not published already in part or whole (except in the form of abstract) in any journal or magazine for private or public circulation, and, is not under consideration of publication elsewhere.

  • I/We will not withdraw the manuscript after 1 week of submission as I have read the Author Guidelines and will adhere to the guidelines.
  • I/We Author(s ) have niether given nor will give this manuscript elsewhere for publishing after submitting in STM Journal(s).
  • I/ We have read the original version of the manuscript and am/ are responsible for the thought contents embodied in it. The work dealt in the manuscript is my/ our own, and my/ our individual contribution to this work is significant enough to qualify for authorship.
  •  I/We also agree to the authorship of the article in the following order:

Author’s name                                    

 

1. ________________

2. ________________

3. ________________

4. ________________

 

We  Author(s) tick this box and would request you to consider it as our signature as we agree to the terms of this Copyright Notice, which will apply to this submission if and when it is published by this journal.