Open Access Open Access  Restricted Access Subscription or Fee Access

Mechanical Properties of Composites Made from Waste PET and Coconut Husk Fibres Using an Innovative Method

B. Y. R. Surnam, R. Teelonah

Abstract


The main purpose of this study was to develop a composite material based on two waste products, namely, polyethylene terephthalate (PET) bottles and coconut husk fibres using a simple innovative method to improve its mechanical properties. The fibres, after extraction, were treated with 5 wt% NaOH. They were then coated with a thin layer of polyester resin. The composite specimens were then manufactured in an industrial furnace. The shredded PET bottles were melted in a furnace and then poured into a mould cavity consisting of randomly oriented coated coconut fibres. The fibre content and the fibre length were varied to determine the ones with the optimum mechanical properties. It was found that the composites with 5% fibre content and 5 cm fibre length had the highest tensile of 7.8 MPa and the highest flexural strength of 18.6 MPa. Though the composites cannot be used for load- bearing applications, they would be appropriate for non-load-bearing ones.

Full Text:

PDF

References


Haji A, Rahbar RS. Structure evolution and mechanical behavior of poly(ethylene terephthalate) fibers drawn at different number of drawing stages. Chem Ind Chem Eng Q. 2012; 18: 233–243.

Jerpdal L. Processing of Self-Reinforced Poly(Ethylene Terephthalate) Composites for Automotive Applications. Doctoral Thesis. Stockholm, Sweden: KTH; 2017.

Mahdi F, Khan AA, Abbas H. Physicochemical properties of polymer mortar composites using resins derived from post-consumer PET bottles. Cement Concrete Compos. 2007; 29 (3): 241–248.

Monteiro SN, Terrones LAH, D’Almeida JRM. Mechanical performance of coir fiber/polyester composites. Polym Test. 2008; 27 (5): 591–595.

Abdullah NM, Ahmad I. Effect of chemical treatment on mechanical and water-sorption properties coconut fiber-unsaturated polyester from recycled PET. Int Scholar Res Notices. 2012; 2012:

Abdullah NM, Ahmad I. Potential of using polyester reinforced coconut fiber composites derived from recycling polyethylene terephthalate (PET) waste. Fibers Polym. 2013; 14 (4): 584–590.

Franciszczak P, Merijs-Meri R, Kalniņš K, Błędzki AK, Zicans J. Short-fibre hybrid polypropylene composites reinforced with PET and rayon fibres – effects of SSP and interphase tailoring. Compos

Struct. 2017; 181: 121–137.

Maria S, Laurentia A, Mihaela N, Mihai G, Dana GF, Denisa F, Anton F, Roxana T, Doina C. Layered composites based on recycled PET/functionalized woven flax fibres. In: Proceedings of

the 2nd World Congress on Recent Advances in Nanotechnology (RAN’17), Barcelona, Spain, April 4–6, 2017. Paper No. ICNNFC 144.

Kabir MM, Wang H, Aravinthan T, Cardona F, Lau KT. Effects of natural fibre surface on composite properties: A review. Proceedings of 1st International Postgraduate Conference on Engineering, Designing and Developing the Built Environment for Sustainable Wellbeing, Brisbane, Australia, April 2011. p. 94.

Ezekiel N, Ndazi B, Nyahumwa C, Karlsson S. Effect of temperature and durations of heating on coir fibers. Ind Crops Prod. 2011; 33: 638–643.

Owen M, Ishiaku U, Danladi A, Dauda B, Romli A. The effect of surface coating and fibre loading on thermo-mechanical properties of recycled polyethylene terephthalate (RPET)/epoxy-coated

kenaf fibre composites. AIP Conf Proc. 2018; 1985: 030002-1–030002-14.

Nkem Ede A, Olaoluwa Agbede JO. Use of coconut husk fiber for improved compressive and flexural strength of concrete. Int J Sci Eng Res. 2015; 6: 968–974.

Basak, MK, Bhaduri SK, Paul NB. Nature of the microbiologically extracted coir fibre from green coconut husks — an agro-waste. Agric Wastes. 1983; 5: 51–58.

Satyanarayana A, Kulkarni A, Rohatgi P. Structure and properties of coir fibres. Proc Indian Acad Sci Sect C Eng Sci. 1983; 4: 419–436.

Oushabi A, Sair S, Oudrhiri Hassani F, Abboud Y, Tanane O, El Bouari A. The effect of alkali treatment on mechanical, morphological and thermal properties of date palm fibers (DPFs): study

of the interface of DPF–polyurethane composite. South Afr J Chem Eng. 2017; 23: 116–123.

ASTM C1557-14. Standard Test Method for Tensile Strength and Young’s Modulus of Fibers. West Conshohocken, PA, USA: ASTM International; 2014.

ASTM D638-14. Standard Test Method for Tensile Properties of Plastics. West Conshohocken,PA, USA: ASTM International; 2014.

ASTM D790-17. Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials. West Conshohocken, PA, USA: ASTM International;

Nasif AR Effect of coir fiber length and content on mechanical properties of unsaturated polyester composites. Iraqi J Appl Phys. 2015; 11: 27–29.

ASTM E384-11. Standard Test Method for Knoop and Vickers Hardness of Materials. West Conshohocken, PA, USA: ASTM International; 2012.

Fengel D, Wegener G. Wood: Chemistry, Ultrastructure, Reactions. Berlin, Germany: de Gruyter; 1983.

Krässig HA. Cellulose: Structure, Accessibility and Reactivity. Yverdon, Switzerland: Gordon and Breach Science Publishers; 1993.

Bredereck K, Hermanutz F. Man-made cellulosics. Rev Prog Color Relat Top. 2005; 35: 59–75.

Kljun A, Benians TAS, Goubet F, Meulewaeter F, Knox JP, Blackburn RS. Comparative analysis of crystallinity changes in cellulose I polymers using ATR-FTIR, x-ray diffraction, and

carbohydrate-binding module probes. Biomacromolecules. 2011; 12: 4121–4126.

Mohkami M, Talaeipour M. Negatively charged fibers. BioResources. 2011; 6 (2): 1988–2003.

Fan M, Dai D, Huang B. Fourier transform infrared spectroscopy for natural fibres. In: Salih SM, editor. Fourier Transform – Materials Analysis. London, UK: IntechOpen; 2012. Pp. 45–68.

Popescu M-C, Popescu C-M, Lisa G, Sakata Y. Evaluation of morphological and chemical aspects of different wood species by spectroscopy and thermal methods. J Mol Struct. 2011; 988 (1–3),

–72.

Poletto M, Ornaghi Júnior HL, Zattera AJ. Native cellulose: structure, characterization and thermal properties. Materials (Basel). 2014; 7: 6105–6119.

Popescu C-M, Popescu M-C, Singurel G, Vasile C, Argyropoulos DS, Willfor S. Spectral characterization of eucalyptus wood. Appl Spectrosc. 2007; 61: 1168–1177.

Brebu M, Vasile M. The thermal degradation of lignin – a review. Cellulose Chem Technol. 2010; 44: 353–363.

Ronkay F, Czigány T. Development of composites with recycled PET matrix. Polym Adv Technol.

; 17 (9–10): 830–834.

Kuete MA, van Velthem P, Ballout W, Nysten B, Devaux J, Ndikontar MK, Pardoen T, Bailly C. Integrated approach to eco-friendly thermoplastic composites based on chemically recycled PET

co-polymers reinforced with treated banana fibres. Polymers (Basel). 2022; 14 (22): 4791.

Singh CP, Patel RV, Hasan MF, Yadav A, Kumar V, Kumar A. Fabrication and evaluation of physical and mechanical properties of jute and coconut coir reinforced polymer matrix composite.Mater Today: Proc. 2021; 38 (5): 2572–2577.

Abdullah NM, Ahmad I. Potential of using polyester reinforced coconut fiber composites derived from recycling polyethylene terephthalate (PET) waste. Fibers Polym. 2013; 14 (4): 584–590.

Tan C, Ahmad I, Heng M, Characterization of polyester composites from recycled polyethylene terephthalate reinforced with empty fruit bunch fibers. Mater Des. 2011; 32: 4493–4501.

Surnam BYR, Imrith G. Investigation on the mechanical properties of coconut leaf stalk fibres reinforced composites. J Nat Fibers. 2023; 20 (2): 2198276.

Faruka O, Bledzkia AK, Fink HP, Sain M. Biocomposites reinforced with natural fibers: 2000–2010. Prog Polym Sci. 2012; 37:1552–1596.

Nunes RAX, Costa VC, Calado, VM de A, Branco JRT. Wear, friction, and microhardness of a thermal sprayed PET: poly (ethylene terephthalate) coating. Mater Res. 2009; 12: 121–125.


Refbacks

  • There are currently no refbacks.