Thermo-Mechanical Properties of Unsaturated Polyester Reinforced with Coconut and Snail Shells

Authors

  • Akpan E. I Engineering, Ambrose Alli University, Nigeria
  • S. O. Adeosun Engineering, University of Lagos, Nigeria
  • H. A. Akanegbu Engineering, Ambrose Alli University, Nigeria

Abstract

 

 

Abstract

Particulate-filled polymer composites are becoming quite attractive because of their low cost and wide applications. In this study, the effects of coconut shell (CS) and snail shell (SS) volume fractions (5–50 vol. %) on the thermal and mechanical properties of unsaturated polyester resin (UPR) composite are investigated. The results show that tensile strength, elongation at break, flexural strength, and hardness of the composite increase as filler concentration increases. However, impact strength of the composite decreases with increase in filler concentration. FTIR spectra of UPR composites show that, at 30 vol. % filler content there is good and effective interfacial interaction between UPR matrix and the fillers. The thermal properties from DTA measurement show that the glass transition temperature, Tg and Tm of the composites, at 5, 20 and 50 vol % reinforcement contents, are lower and higher respectively to the cured-virgin UPR matrix. The morphology of fillers dispersion into the polymer matrix observed using the scanning electron microscopy (SEM) indicates homogeneous dispersion in the UPR matrix with strong interfacial adhesion between the fillers and UPR matrix. These result in enhanced mechanical properties.

 

Keywords: Coconut shell (CS), snail shell (SS), UPR composite, thermal and mechanical properties

Author Biographies

  • Akpan E. I, Engineering, Ambrose Alli University, Nigeria
    Department of Materials and Production
  • S. O. Adeosun, Engineering, University of Lagos, Nigeria
    Department of Metallurgical and Materials
  • H. A. Akanegbu, Engineering, Ambrose Alli University, Nigeria
    Department of Materials and Production

Downloads

Published

2019-04-06

Issue

Vol. 2 No. 2 (2014)

Section

Articles

License

Declaration and Copyright Transfer Form

(to be completed by authors)

I/ We, the undersigned author(s) of the submitted manuscript, hereby declare, that the above manuscript which is submitted for publication in the STM Journals(s), is not published already in part or whole (except in the form of abstract) in any journal or magazine for private or public circulation, and, is not under consideration of publication elsewhere.

  • I/We will not withdraw the manuscript after 1 week of submission as I have read the Author Guidelines and will adhere to the guidelines.
  • I/We Author(s ) have niether given nor will give this manuscript elsewhere for publishing after submitting in STM Journal(s).
  • I/ We have read the original version of the manuscript and am/ are responsible for the thought contents embodied in it. The work dealt in the manuscript is my/ our own, and my/ our individual contribution to this work is significant enough to qualify for authorship.
  •  I/We also agree to the authorship of the article in the following order:

Author’s name                                    

 

1. ________________

2. ________________

3. ________________

4. ________________

 

We  Author(s) tick this box and would request you to consider it as our signature as we agree to the terms of this Copyright Notice, which will apply to this submission if and when it is published by this journal.