Optimum Selection of Process Parameters of CNC End Milling Using Grey Relational Analysis (GRA)

Authors

  • ANKITA RANDIVE MADHAV INSTITUTE OF TECHNOLOGY AND SCIENCE GWALIOR (M.P.)
  • Sharad Agrawal
  • Dinesh Kumar Kasdekar

DOI:

https://doi.org/10.37591/joprm.v8i3.1088

Keywords:

CNC end milling, process parameters, machining time, minimum lubrication thickness, Grey Relational Analysis

Abstract

In this competitive world, to build a good quality product and productivity of any manufacturing corporation optimum selection of process parameters is very vital, when it comes to the desired dimension and tolerances in order to fulfill the purpose of the product. This paper explains the utility of grey relational analysis (GRA) for minimizing the machining time and lubrication thickness simultaneously, in vertical CNC end milling of Al-7075 T6. The input parameters to be taken in this research work are cutting velocity, feed rate and depth of cut. Al-7075 T6 has very high strength amongst 7000 series aluminum alloy. L9 Orthogonal array has been generated using DOE of MINITAB with 3 factors and 2 levels.

Author Biography

  • ANKITA RANDIVE, MADHAV INSTITUTE OF TECHNOLOGY AND SCIENCE GWALIOR (M.P.)
    M. TECH SCHOLAR, MECHANICAL ENGINEERING DEPARTMENT

References

Pratap A, Kushwah S, Malvi CS, Kasdekar DK. Determination Of Optimal Parameters With Surface Roughness Characteristics Of CNC End Milling By Grey Relational Analysis And Principal Component Analysis, Advanced Multi-Criteria Decision Making For Addressing Complex Sustainability Issues, in IGI Global Book Chapter, 2018.

Vishnu Vardhan M, Sankaraiah G, Yohan M. Optimization of process parameters in CNC milling for machining P20 steel using NSGA-II, IOSR J Mech Civ Eng. Ver. V, 14(3): 2320–334p.

Neeli N, Jenarthanan MP, Dileep Kumar G. Multi-response optimization for machining GFRP composites using GRA and DFA, Multidiscip Model Mater Struct. 2018.

S. J. P, Kakkar K, Khan MS. A Comprehensive Study on the Process Parameters for Machining Aluminium 7075, 2017, 5(11): 622–628p.

Rao HP. Optimization of CNC End Milling Process Parameters for Aluminium 6061 Alloy using Carbide Tool Material by Design of Experiments, 2017, 3(11): 84–90p.

Panshetty SS. Optimization of Process Parameters in Milling Operation by Taguchi ’ s Technique using Regression Analysis, 2016, 2(11): 130–136p

Patil P. Optimization of Process Parameters of CNC End Milling using Grey based Taguchi Method, 2017, 4(8): 84–95p.

Kasdekar DK, Parashar V. A Study on Responses Parameter of EDM Process in EN-353 Steel Using Grey Relational Analysis, 2015, 1(3): 1–9p.

Moshat S, Datta S, Bandyopadhyay A, Pal P. Optimization of CNC end milling process parameters using PCA-based Taguchi method, Int J Eng Sci Technol. 2010, 2(1): 95–102p.

Gopal PM, Soorya Prakash K. Minimization of cutting force, temperature and surface roughness through GRA, TOPSIS and Taguchi techniques in end milling of Mg hybrid MMC, Meas J Int Meas Confed. 2018, 116: 178–192p.

Mahesh TP, Rajesh R. Optimal Selection of Process Parameters in CNC End Milling of Al 7075-T6 Aluminium Alloy Using a Taguchi-fuzzy Approach, Procedia Mater Sci. 2014.

Ab Rashid M, Harun W, Nik Mohamed N, Mohd Rose A. Optimization of Multi-Pass Pocket Milling Parameter using Ant Colony Optimization.

Downloads

Published

2019-01-02

Issue

Vol. 8 No. 3 (2018)

Section

Articles

License

Declaration and Copyright Transfer Form

(to be completed by authors)

I/ We, the undersigned author(s) of the submitted manuscript, hereby declare, that the above manuscript which is submitted for publication in the STM Journals(s), is not published already in part or whole (except in the form of abstract) in any journal or magazine for private or public circulation, and, is not under consideration of publication elsewhere.

  • I/We will not withdraw the manuscript after 1 week of submission as I have read the Author Guidelines and will adhere to the guidelines.
  • I/We Author(s ) have niether given nor will give this manuscript elsewhere for publishing after submitting in STM Journal(s).
  • I/ We have read the original version of the manuscript and am/ are responsible for the thought contents embodied in it. The work dealt in the manuscript is my/ our own, and my/ our individual contribution to this work is significant enough to qualify for authorship.
  •  I/We also agree to the authorship of the article in the following order:

Author’s name                                    

 

1. ________________

2. ________________

3. ________________

4. ________________

 

We  Author(s) tick this box and would request you to consider it as our signature as we agree to the terms of this Copyright Notice, which will apply to this submission if and when it is published by this journal.