Parametric optimization of end milling operation on EN24 – A Mapping Review

Authors

  • K. V. Vaghamshi
  • Dr. G. D. Acharya

DOI:

https://doi.org/10.37591/joprm.v8i3.1478

Keywords:

Operation parameters, Response surface methodology, Material removal rate, Optimization

Abstract

The milling of EN24 hardened steels has been applied in many cases in production. The purpose of this review is to study the effect of influence of milling operation parameters such as cutting speed, feed and depth of cut on the material removal rate and surface roughness in milling of EN24 steel. The effect of milling operation parameters are evaluated for minimum surface roughness and maximizing material removal rate. Maximum material removal rate (MRR) with high surface finish in machining is highly desirable for EN24 steel. The research models can be effectively used to predict the surface roughness and material removal rate in milling of EN24 steel.

Downloads

Published

2019-03-12

Issue

Vol. 8 No. 3 (2018)

Section

Articles

License

Declaration and Copyright Transfer Form

(to be completed by authors)

I/ We, the undersigned author(s) of the submitted manuscript, hereby declare, that the above manuscript which is submitted for publication in the STM Journals(s), is not published already in part or whole (except in the form of abstract) in any journal or magazine for private or public circulation, and, is not under consideration of publication elsewhere.

  • I/We will not withdraw the manuscript after 1 week of submission as I have read the Author Guidelines and will adhere to the guidelines.
  • I/We Author(s ) have niether given nor will give this manuscript elsewhere for publishing after submitting in STM Journal(s).
  • I/ We have read the original version of the manuscript and am/ are responsible for the thought contents embodied in it. The work dealt in the manuscript is my/ our own, and my/ our individual contribution to this work is significant enough to qualify for authorship.
  •  I/We also agree to the authorship of the article in the following order:

Author’s name                                    

 

1. ________________

2. ________________

3. ________________

4. ________________

 

We  Author(s) tick this box and would request you to consider it as our signature as we agree to the terms of this Copyright Notice, which will apply to this submission if and when it is published by this journal.