Effect on Welding Parameters on FSW of Aluminium Alloys 7075 T6 with Varying Tool Geometry

Authors

  • Jagdish Suthar M. tech Scholar
  • Dinkar Narayan Assistant Professor
  • Raj Kumar Salvi Assistant Professor (HEAD)

DOI:

https://doi.org/10.37591/joprm.v7i3.217

Keywords:

Tensile strength, Tool pin profile.

Abstract

The present study is to investigate effect of tool pin profile over the friction stir welding of aluminium alloys 7075 T6. The welding process is to be conducted on varying the welding process parameters such as tool rotation speed (rpm), welding speed (mm/min) and tool pin profile. In this work, tensile strength tool rpm increase UTS in FSW joint decease up to certain level, including effect tool rpm on weld tensile strength on feeding and as feed in the further increase then UTS increase.

Author Biographies

  • Jagdish Suthar, M. tech Scholar
    Department of Mechanical Engineering, SS College of Engineering, Udaipur, Rajasthan, India
  • Dinkar Narayan, Assistant Professor
    Department of Mechanical Engineering, SS college of Engineering, Udaipur, Rajasthan, India
  • Raj Kumar Salvi, Assistant Professor (HEAD)
    Department of Mechanical Engineering, Sunrise College of Engineering, Udaipur, Rajasthan, India

Downloads

Published

2018-06-12

Issue

Vol. 7 No. 3 (2017)

Section

Articles

License

Declaration and Copyright Transfer Form

(to be completed by authors)

I/ We, the undersigned author(s) of the submitted manuscript, hereby declare, that the above manuscript which is submitted for publication in the STM Journals(s), is not published already in part or whole (except in the form of abstract) in any journal or magazine for private or public circulation, and, is not under consideration of publication elsewhere.

  • I/We will not withdraw the manuscript after 1 week of submission as I have read the Author Guidelines and will adhere to the guidelines.
  • I/We Author(s ) have niether given nor will give this manuscript elsewhere for publishing after submitting in STM Journal(s).
  • I/ We have read the original version of the manuscript and am/ are responsible for the thought contents embodied in it. The work dealt in the manuscript is my/ our own, and my/ our individual contribution to this work is significant enough to qualify for authorship.
  •  I/We also agree to the authorship of the article in the following order:

Author’s name                                    

 

1. ________________

2. ________________

3. ________________

4. ________________

 

We  Author(s) tick this box and would request you to consider it as our signature as we agree to the terms of this Copyright Notice, which will apply to this submission if and when it is published by this journal.