Design of Steel Plate Shear Wall with Opening for Steel Building

Authors

  • Anita N. Patil
  • Ajay G. Dahake

Abstract

Steel plate shear walls have been used more and more in the steelstructures to resist earthquake and wind forces. This system offersseveral advantages as compared to the other usual lateral load resistingsystems. Steel saving, speed of erection, reduced foundation cost, and increased usable space in buildings are some apparent advantages ofthe steel plate shear walls. Steel plate shear walls also provide majorstiffness against building drift for the hi-rise buildings.This paper describes the analysis and design of high-rise steel buildingframe with and without Steel platesshear wall (SPSW). In this paperequivalent static analysis is carried out for steel moment resistingbuilding frame having (G+4) storey situated in zone IV. The analysis of steel plate shear wall and the building are carried out using Software STAAD PRO. The main parameters considered in this paper are tocompare the seismic performance of buildings such as;bendingmoment, shear force, deflection and axial force. This paper alsofocused on the effects comes on the steel structure with and withoutshear wall.

 

Keywords:Steel plate shear wall, steel building, aspect ratio, IS 1893-2002

Downloads

Published

2020-12-19

Issue

Vol. 1 No. 3 (2014)

Section

Research Article

License

Declaration and Copyright Transfer Form

(to be completed by authors)

I/ We, the undersigned author(s) of the submitted manuscript, hereby declare, that the above manuscript which is submitted for publication in the STM Journals(s), is not published already in part or whole (except in the form of abstract) in any journal or magazine for private or public circulation, and, is not under consideration of publication elsewhere.

  • I/We will not withdraw the manuscript after 1 week of submission as I have read the Author Guidelines and will adhere to the guidelines.
  • I/We Author(s ) have niether given nor will give this manuscript elsewhere for publishing after submitting in STM Journal(s).
  • I/ We have read the original version of the manuscript and am/ are responsible for the thought contents embodied in it. The work dealt in the manuscript is my/ our own, and my/ our individual contribution to this work is significant enough to qualify for authorship.
  •  I/We also agree to the authorship of the article in the following order:

Author’s name                                    

 

1. ________________

2. ________________

3. ________________

4. ________________

 

We  Author(s) tick this box and would request you to consider it as our signature as we agree to the terms of this Copyright Notice, which will apply to this submission if and when it is published by this journal.