UTILIZATION OF WASTE MARBLE SLURRY AND GLASS POWDER IN CONCRETE
DOI:
https://doi.org/10.37591/josem.v5i1.552Abstract
ABSTRACT
In day by day increasing the pollution & cost of cement and sand their replacing material is necessary. In this investigation marble slurry and glass powder was used as a partial replacing material. The proportion of glass powder was 5-25% in interval of 5% by total weight of cement and marble slurry 10-50% in interval of 10% by total weight of sand. This study investigates the performance of concrete mixture in terms of slump, density, compressive strength 28 days, and Flexural strength of beam 28 days .These Concrete specimens were deep cured in water under normal atmospheric temperature. On the basis of result maximum Compressive & Flexural strength achieved at 15 % of replacement of cement by glass powder and 30 % of replacement of sand by marble slurry.The result of variational mix of concrete on all age when compared to normal concrete its use should be promoted for better performance as well as for environmental sustainability.
Key Words:- Concrete, Marble slurry, Glass Powder Workability, Compressive Strength, Flexural Strength
Downloads
Published
Issue
Section
License
Declaration and Copyright Transfer Form
(to be completed by authors)
I/ We, the undersigned author(s) of the submitted manuscript, hereby declare, that the above manuscript which is submitted for publication in the STM Journals(s), is not published already in part or whole (except in the form of abstract) in any journal or magazine for private or public circulation, and, is not under consideration of publication elsewhere.
- I/We will not withdraw the manuscript after 1 week of submission as I have read the Author Guidelines and will adhere to the guidelines.
- I/We Author(s ) have niether given nor will give this manuscript elsewhere for publishing after submitting in STM Journal(s).
- I/ We have read the original version of the manuscript and am/ are responsible for the thought contents embodied in it. The work dealt in the manuscript is my/ our own, and my/ our individual contribution to this work is significant enough to qualify for authorship.
- I/We also agree to the authorship of the article in the following order:
Author’s name
1. ________________
2. ________________
3. ________________
4. ________________
| We Author(s) tick this box and would request you to consider it as our signature as we agree to the terms of this Copyright Notice, which will apply to this submission if and when it is published by this journal. |