THERMAL ANALYSIS OF SQUARE PLATE BY USING FINITE ELEMENT METHOD

Authors

  • Kiran Govind Adhe Deogiri Institute of Engineering and Management Studies Aurangabad (M.S.) India

DOI:

https://doi.org/10.3759/josem.v5i2.957

Keywords:

Keywords, Thermal, FEM, ABAQUS

Abstract

Thermal analysis of isotropic square plate made up of various materials with thermal load application and different boundary conditions is analyzed in this research. Finite element formulation is carried out in the analysis and the FEM formulation is done in the analysis section of the ABAQUS. In this study, flat Square plate without cut-out which can be assumed as perfect plates which are made up steel, aluminium materials are analysed. Finally comparison has been done between the results obtained from ABAQUS results for isotropic square plate without cutout. A study on the structural properties such as deflections and thermal behaviour of different materials has been conducted during the analysis which will be helpful in various fields of engineering.

Author Biography

  • Kiran Govind Adhe, Deogiri Institute of Engineering and Management Studies Aurangabad (M.S.) India

    Post Graduate Student in Structural Engineering, DIEMS Aurangabad,43001, Dist. Aurangabad Maharashtra, India.

    E-mail ID: [email protected]

References

P.S. Lavate and Sandeep Shiyekar P.S. Lavate (&) S. Shiyekar, 2015 “Flexure Analysis of Functionally Graded (FG) Plates”Advances in Structural Engineering.

Bavane. N. U., Patil. S. B., Shinde. S. S., Kore. S. B., Kamble. R. P., 2016 “Dynamic analysis of laminated composite plates and shells by using a new higher-order shear deformation theory and ABAQUS software” Volume 4 Issue XII, International Journal for Research in Applied Science & Engineering Technology (IJRASET).

G. K. Era, V. P. Iua, and X. L. Liua, “Thermal Analysis of Thin Plates Using the Finite Element Method” Department of Civil and Environmental Engineering, University of Macau, Macao SAR, China.

Gandhe G. R., Salve S. B., Pankade P. M., Taur P. G., Tupe D. H.,2018 “Trigonometric Shear Deformation Theory for Thermal Flexural Analysis of Isotropic Plate”2nd International Conference on Materials Manufacturing and Design Engineering

Downloads

Published

2018-09-13

Issue

Vol. 5 No. 2 (2018)

Section

Research Article

License

Declaration and Copyright Transfer Form

(to be completed by authors)

I/ We, the undersigned author(s) of the submitted manuscript, hereby declare, that the above manuscript which is submitted for publication in the STM Journals(s), is not published already in part or whole (except in the form of abstract) in any journal or magazine for private or public circulation, and, is not under consideration of publication elsewhere.

  • I/We will not withdraw the manuscript after 1 week of submission as I have read the Author Guidelines and will adhere to the guidelines.
  • I/We Author(s ) have niether given nor will give this manuscript elsewhere for publishing after submitting in STM Journal(s).
  • I/ We have read the original version of the manuscript and am/ are responsible for the thought contents embodied in it. The work dealt in the manuscript is my/ our own, and my/ our individual contribution to this work is significant enough to qualify for authorship.
  •  I/We also agree to the authorship of the article in the following order:

Author’s name                                    

 

1. ________________

2. ________________

3. ________________

4. ________________

 

We  Author(s) tick this box and would request you to consider it as our signature as we agree to the terms of this Copyright Notice, which will apply to this submission if and when it is published by this journal.