Gob to pursue heat to mould – a study
Keywords:
Glass, Gob, Thermal, Mould, Recycle, Gob mass regulatorAbstract
This article is the study of gob at hot state between molten glass pool and mould machine. The empirical description has modification from trial and error prosecution to suggest automated produce equipment. Feedback sensing loop from plunger feed at mould has data conversion ethic to shaped mass regulator equipment. Modification in the trajectory of flow line production has improved quality produce at minimized wear. Difference in composition-wise viscosity and heat gradient in extra, as well method of transit for a suit of allocation into mould entry has studied to induce non-uniform temperature of gob at the mould. Noise has induced feeder system error to control gob weight by the stepwise automatic camera system. Ethical procure date has conclusive from density in weight calculation from assumed spin dimension set-point.References
Gerard de Leede, Rik Koch: Advanced simulation of 3D glass bottle forming with Abaqus/CAE, Abaqus/Standard and Abaqus/Explicit; 2007; ABAQUS; Users’ Conference 1.
Adrià Biosca, Salvador Borrós, Vicenç Pedret Clemente, and Andrés-Amador García Granada: Glass Gob Modeling and Experimental Validation Using a Drop Test; MATEC Web of Conferences 167, 02009 (2018).
GEORGE L. MILLER CATHERINE SULLIVAN: Machine- Made G lass Con tai ne rs and the End of Production for Mouth-Blown Bottles; HISTORICAL ARCHAEOLOGY, VOLUME 18, 83.
X. J. Liu, M. R. Hyre, G. S. Frost, S. A. Austin: Numerical Simulation of Heat Transfer for the Gob Delivery System in Glass Container Production; ASME 2008 International Mechanical Engineering Congress and Exposition; IMECE2008-66675, pp. 569-576; 8 pages; https://doi.org/10.1115/IMECE2008-66675; Published Online: August 26, 2009.
Miroslav Kovacˇec, Ana Pilipovic´, Nedeljko Sˇtefanic: Improving the quality of glass containers production with plunger process control; CIRP Journal of Manufacturing Science and Technology 3 (2010) 304–310.
Hiltmann, Kaia and Neubauer, Tobias: Case study: Gob loading in a glass moulding machine; Procedia CIRP 39 ( 2016 ) 203 – 208.
Raymond Viskanta∗, Jongmook Lim: Transient cooling of a cylindrical glass gob; Journal of Quantitative Spectroscopy & Radiative Transfer 73 (2002) 481–490.
Eskarne Laizola, Antonio R. Jiménez, Fernando Morgado, Mar Calvache, Fernando Seco: Computer-Vision-Based Gob Inspection System for Monitoring and Control in Glass Industry; Article in Proceedings of SPIE - The International Society for Optical Engineering · May 2003 DOI: 10.1117/12.474025; : https://www.researchgate.net/publication/253427034
Hugh Molesworth; Tony Vann; Automated Visual Control System For Gob Feeders; Published in SPIE Proceedings Vol. 0376: Optical Sensing: Techniques, Benefits, Costs; S. J. Bennett, Editor(s);Proc. SPIE 0376, Optical Sensing: Techniques, Benefits, Costs, (10 August 1983); doi: 10.1117/12.934724
N. Sesha Prakash: Neck finish in glass hollowware; Hollow glass finishing; Glass International July/August 2013.
