Comparative Analysis of High Speed Comparator for A to D Converters
DOI:
https://doi.org/10.37591/jovdtt.v5i2.1589Abstract
In this paper dynamic comparator along with the output buffer stage has been introduced. The simulation is carried out in 130 and 90 nm technologies. The supply voltage for 130 nm is 1.3 V and for 90 nm is 0.9 V. Different analyses for various characteristics of the comparator such as ICMR, delay, offset voltage and power dissipation is carried out in 130 and 90 nm CMOS technology. The comparator benefits from two stages and two operational phases to reduce the offset voltage caused by the mismatch inside the positive feedback circuit. The simulation result shows speed 6.71 and 5.04 GHz with the power dissipation 13.04 and 86.11 μW in 90 and 130 nm technologies respectively. The power consumption and offset voltage of the comparator present in this paper is less in comparison to conventional comparator. The simulation results allow the circuit designer to fully explore the tradeoffs in comparator design.
Keywords: CMOS, MOSFET, comparator, ICMR, offset voltage, power dissipation
Cite this Article
Gandhi Priyesh P, Rathod Neha B, Devashrayee N.M. Comparative Analysis of High Speed Comparator for A to D Converters. Journal of VLSI Design Tools and Technology (JoVDTT). 2015; 5(2): 4–10p.
Downloads
Published
Issue
Section
License
Thank you for submitting the manuscript to the Journal of VLSI Design Tools & Technology. With the online journal management system that we are using, you will be able to track its progress through the editorial process by logging in to the journal web site:
An author may request for withdrawal of his/her manuscript, within a week's
time (w.e.f. the date of submission of the manuscript). The Author is
recommended to follow strictly the Instructions in Manuscript Withdrawal
Policy (As per URL given below)
http://stmjournals.com/pdf/manuscript%20withdrawl.pdf
If you have any questions, please contact me. Thank you for considering this
journal as a venue for your work.