ANALYSIS OF G+15 NORMAL RCC FRAME AND ZIPPER BRACED FRAME BY PUSH OVER METHOD IN SAP2000

Authors

  • MONA DILIPKUMAR KUDWE PEOPLES EDUCATION SOCIETY COLLEGE OF ENGINEERING AURANGABAD

DOI:

https://doi.org/10.3759/rtcet.v8i3.1161

Abstract

This paper describes the comparative analysed results of R.C.C zipper braced frame with standard RCC regular frame for residential building of G+15 storey. The modelling of zipper braced frame were done by using pushover analysis method in SAP2000 software. Pushover analysis were performed for estimating the hinges in both frames, displacement, base shear and modal time period. The analysis indicates that there is almost insignificant hinges in zipper braced frame when compared with the normal frame of R.C.C. As well Zipper braced frames shows less time period about oscillation as compared to normal frame. The ATC capacity spectrum method evaluated the capacity curve which shows if more displacement than more will be the base force, in which maximum displacement and base force is in normal frame and zipper proves to be in safer zone.

Downloads

Published

2018-11-30

Issue

Vol. 8 No. 3 (2018)

Section

Research Article

License

Declaration and Copyright Transfer Form

(to be completed by authors)

I/ We, the undersigned author(s) of the submitted manuscript, hereby declare, that the above manuscript which is submitted for publication in the STM Journals(s), is not published already in part or whole (except in the form of abstract) in any journal or magazine for private or public circulation, and, is not under consideration of publication elsewhere.

  • I/We will not withdraw the manuscript after 1 week of submission as I have read the Author Guidelines and will adhere to the guidelines.
  • I/We Author(s ) have niether given nor will give this manuscript elsewhere for publishing after submitting in STM Journal(s).
  • I/ We have read the original version of the manuscript and am/ are responsible for the thought contents embodied in it. The work dealt in the manuscript is my/ our own, and my/ our individual contribution to this work is significant enough to qualify for authorship.
  •  I/We also agree to the authorship of the article in the following order:

Author’s name                                    

 

1. ________________

2. ________________

3. ________________

4. ________________

 

We  Author(s) tick this box and would request you to consider it as our signature as we agree to the terms of this Copyright Notice, which will apply to this submission if and when it is published by this journal.