Experimental Investigation on the Seismic Disaster Mitigation of Unreinforced Brick Masonry Buildings

Authors

  • Mohammad Javed
  • Bashir Alam
  • Ali M. Syed
  • Khan Shahzada

Abstract

The Himalayan region is considered to have the potential to produce earthquakes of magnitude 8.0 or greater once every 100 years. Since the occurrence of an earthquake cannot be prevented; therefore, seismic disaster mitigation remains the only option for the civil society. Unreinforced masonry (URM) buildings, constructed with stone or brick, are very common in Northern Pakistan part of Himalayan belt. The seismic performance of stone masonry was found very poor in October 2005 Kashmir earthquake and was the main source of fatalities as most of the collapsed buildings in the area were constructed with stone masonry. Unreinforced brick masonry (URBM) buildings, however, performed much better than stone masonry buildings and survived collapse in most of the highly affected areas except Balakot town and in some parts of Muzzafarabad. The performance of URBM would have been much better if buildings were designed and constructed using engineering principles of earthquake disaster mitigation instead of experience based thumbs rules developed by the masons. Taking the lessons from the earthquake disasters of October 2005, an experimental investigation was carried out to evaluate and quantify the seismic performance of unreinforced brick masonry (URBM) shear walls constructed in stone dust mortar being widely used in Northern Pakistan and thus to further promote the research and development for earthquake disaster prevention. In-plane shear-compression tests were carried out on twelve walls, using quasi-static cyclic loading. The effect of geometry and extent of gravity load (as measured by pre-compression level) on various parameters used to quantify seismic performance such as ductility, ultimate drift ratio and equivalent viscous damping for evaluating energy dissipation capacity, of the walls is also examined and discussed.
Keywords: Unreinforced masonry, Shear strength, Ductility, Drift, Energy dissipation.

Downloads

Published

2020-12-16

Issue

Vol. 2 No. 1-3 (2012)

Section

Articles

License

Declaration and Copyright Transfer Form

(to be completed by authors)

I/ We, the undersigned author(s) of the submitted manuscript, hereby declare, that the above manuscript which is submitted for publication in the STM Journals(s), is not published already in part or whole (except in the form of abstract) in any journal or magazine for private or public circulation, and, is not under consideration of publication elsewhere.

  • I/We will not withdraw the manuscript after 1 week of submission as I have read the Author Guidelines and will adhere to the guidelines.
  • I/We Author(s ) have niether given nor will give this manuscript elsewhere for publishing after submitting in STM Journal(s).
  • I/ We have read the original version of the manuscript and am/ are responsible for the thought contents embodied in it. The work dealt in the manuscript is my/ our own, and my/ our individual contribution to this work is significant enough to qualify for authorship.
  •  I/We also agree to the authorship of the article in the following order:

Author’s name                                    

 

1. ________________

2. ________________

3. ________________

4. ________________

 

We  Author(s) tick this box and would request you to consider it as our signature as we agree to the terms of this Copyright Notice, which will apply to this submission if and when it is published by this journal.