Voltage and Power Quality Control in Wind Power Application by Dynamic Compensation
DOI:
https://doi.org/10.37591/.v4i1.3046Abstract
Power quality problem is a critical problem in a power system. Most of the pollution problems created in power system is due to the nonlinear nature of loads. Due to large amount of non-linear equipment, impact and fluctuating loads (such as locomotive, arc-furnace, welding equipment, etc.); wind power as a rule, does not contribute to voltage regulation in grids. Also wind power very often is a source of voltage sag or swell. The power systems are often considered weak in that they possess relatively low short-circuit ratio, compared to a grid. Network voltage control becomes a challenging task as a result. The loads are also sensitive to short-duration disturbances in the form of voltage sags or swells. The use of STATCOM in improving voltage quality of isolating power systems is considered. The compensators are used to mitigate the effects of momentary voltage sags/swells.
Keywords: Sag, STATCOM, Power quality
Downloads
Published
Issue
Section
License
Journal Title:
Title of the Paper:
Corresponding Author’s Information:
Name: Address:
E-mail:
Contact Number:
It is herein agreed that: The copyright to the above-listed unpublished and original article is transferred to STM Journals.
This copyright transfer covers the exclusive right to reproduce and distribute the contribution, including reprints, translations, photographic reproductions, microform, electronic form (offline, online), or any other reproductions of similar nature.
I/We declare that above manuscript is not published already in part or whole (except in the form of abstract) in any journal or magazine for private or public circulation, and, is not under consideration of publication elsewhere.
I/ We warrant(s) that his/her/their contribution is original, except for such excerpts from copyrighted works as may be included with the permission of the copyright holder and author thereof, that it contains no libelous statements, and does not infringe on any copyright, trademark, patent, statutory right, or propriety right of others.
I/We will not publish his/her/their above said contribution anywhere else without the prior written permission of the publisher unless it has been changed substantially. I/We also agree to the authorship of the article in the following order: Author(s) Name Signature(s)
1. ________________
2. ________________
3. ________________
4. ________________
The author(s) agree to the terms of this Copyright Notice, which will apply to this submission if and when it is published by this journal (comments if any to the editor can be added below).
