Analysis of Doubly Fed Induction Generator with Effect of Various Design Parameters

Authors

  • Nitin Goel Department of Electrical Engineering, YMCA University of Science and Technology, Faridabad, Haryana, India
  • Paras Ram Sharma Department of Electrical Engineering, YMCA University of Science and Technology, Faridabad, Haryana, India
  • Dheeraj Joshi Department of Electrical Engineering, YMCA University of Science and Technology, Faridabad, Haryana, India

DOI:

https://doi.org/10.37591/.v8i2.589

Abstract

Increasing demand for electricity requires developing new generation techniques which fulfil the demand and keep the environment clean. As per the survey, in the category of renewable energy, wind power plants play an important role in the power generation. In the wind energy generation system, a doubly fed induction generator (DFIG) is more popular. In this paper, the performance of DFIG investigated with different design parameters. Study the effect of various parameters and injected rotor voltage on the stator and rotor active-reactive power and currents of DFIG at variable speed. After finding the parameters of the machine, the analysis is done by MATLAB/Simulink. The analysis shows that variation in design parameters with injected rotor voltages would affect the DFIG performance and control the mode of operation: motoring mode and generating mode. 


Keywords: Asynchronous operation, doubly fed induction generator, induction generator, wind energy

Cite this Article

Nitin Goel, Paras Ram Sharma, Dheeraj Joshi. Analysis of Doubly Fed Induction Generator with Effect of Various Design Parameters. Trends in Electrical Engineering. 2018; 8(2): 10–18p.

 


Author Biographies

  • Nitin Goel, Department of Electrical Engineering, YMCA University of Science and Technology, Faridabad, Haryana, India
    Assistant Professor, Department of Electrical Engineering
  • Paras Ram Sharma, Department of Electrical Engineering, YMCA University of Science and Technology, Faridabad, Haryana, India
    Professor, Department of Electrical Engineering
  • Dheeraj Joshi, Department of Electrical Engineering, YMCA University of Science and Technology, Faridabad, Haryana, India
    Professor, Department of Electrical Engineering

References

Joselin Herberta GM, Iniyanb S, Sreevalsanc E, et al. A review of wind energy technologies. RSER Science Direct, 2007;11 : 1117–29p

Global Wind Energy Council, Indian Wind Turbine Manufacturers Association, World Institute of Sustainable Energy: India Wind Energy Out Look; 2011

Piegari L, Rizzo R, Trricoli P. High Efficiency Wind Generator with Variable Speed Dual Excited Synchronous Machine, International Conference on Clean Electrical Power 2007, 2007 May 21-23Capri, 795-6p (Published Conference Paper)

Blaabjerg F, Chen Z. Power Electronics for Modern Wind Turbine. Morgan & Claypool Publisher, San Rafael, 2006.

Zavadil R, Miller N, Ellis A, et al. Making connections: wind generation challenges and progress. IEEE Trans. PEM; 2005;3 (6);26-12p

Muller S, Deicke M, De Doncker RW. Doubly fed induction generator systems for wind turbines. IEEE Trans. IAM; 2002;8( 3):26–8p

Kling WL, Slootweg JG. Wind turbines as power plants. Proc. of IEEE/Cigre, Workshop on wind power and the impacts on power systems, 2002 June 17–18; Oslo, Norway.

Bonnet F, Vidal P E, Pietrzak-David M. Dual Direct Torque Control of Doubly Fed Induction Machine”, IEEE Trans Ind. Elec. 2007;54(5):2482–8p.

Morel L, Godfroid H, Mirzaian A, et al. Double-fed induction machine: converter optimisation and field oriented control without position sensor, Proc. of the IEE Elect. Power Appl.1998; 145(4): 360–9p

Xu L, Wei C. Torque and reactive power control of a doubly fed induction machine by position sensorless scheme, IEEE Trans. Ind. Appl., 1995; 31(3): 636–7p.

Ekanayake, J E. Dynamic Modeling of Doubly Fed Induction Generator Wind Turbines. IEEE Trans. on Power Systems, 18, pp. 803-809, May 2003.

Sharma P, Bhatti T S, Ramakrishana K, et al. Doubly Fed Induction Generator: an Overview, JEEE. 2010; 3:189-6p.

Olimpo Anaya Lara, Nick Jenkins. Wind Energy Generation– Modeling and Control. Wiley Publication; 2009.

Downloads

Published

2018-10-04

Issue

Vol. 8 No. 2 (2018)

Section

Articles

License

Journal Title:

Title of the Paper:

Corresponding Author’s Information:

Name: Address:

E-mail:

Contact Number:

It is herein agreed that: The copyright to the above-listed unpublished and original article is transferred to STM Journals.

This copyright transfer covers the exclusive right to reproduce and distribute the contribution, including reprints, translations, photographic reproductions, microform, electronic form (offline, online), or any other reproductions of similar nature.

I/We declare that above manuscript is not published already in part or whole (except in the form of abstract) in any journal or magazine for private or public circulation, and, is not under consideration of publication elsewhere.

 I/ We warrant(s) that his/her/their contribution is original, except for such excerpts from copyrighted works as may be included with the permission of the copyright holder and author thereof, that it contains no libelous statements, and does not infringe on any copyright, trademark, patent, statutory right, or propriety right of others.

I/We will not publish his/her/their above said contribution anywhere else without the prior written permission of the publisher unless it has been changed substantially. I/We also agree to the authorship of the article in the following order: Author(s) Name Signature(s)

1. ________________

2. ________________

3. ________________

4. ________________

The author(s) agree to the terms of this Copyright Notice, which will apply to this submission if and when it is published by this journal (comments if any to the editor can be added below).