Procedure and design of a Gear Hobbing Machine

Authors

  • Saurav thakur , Student, Mechanical department, ABESIT, Ghaziabad.

DOI:

https://doi.org/10.37591/tmet.v12i2.6660

Keywords:

Keywords- spindles, Gear Hobbing, coventional hobbing, Hobbing Parameters, flutes.

Abstract

Making gears involves using a hobbing machine. Sprockets, gears, and splined components are cut using a hob, a specialised cutting tool, on a hobbing machine, a sort of milling device. The hob is a cylinder-shaped cutting tool with helical-shaped teeth arranged in rows. Sprockets, gears, and splined components are cut using a hob, a specialised cutting tool, on a hobbing machine, a sort of milling device. The hob is a cylinder-shaped cutting tool with helical-shaped teeth positioned in rows The work item is held on one spindle of the hobbing machine, and the hob is on the other. As both the hob and the workpiece are brought into the spindles rotate at a specified ratio to cut the teeth. Hobbing machines can produce a variety of goods, including worm gears, ratchets, involute gears, and helical gears, at a low cost with high accuracy.

References

REFERENCES

Brecher, C., C. Gorgels and T.Röthlingshofer. “Manufacturing Simulationof Beveloid Gears for Use in General ToothContact Analysis Software,” ProductionEngineering Research and Development 3,2009, pp. 103–109.

Weck, M., C. Brecher, F. Klocke and U.Rütjes. “Analysis of a Bevel Gear CuttingProcess by Manufacturing Simulation,”Production Engineering–Research andDevelopment XII, 2005, pp. 107–110.

Gutmann, P. “Shear Force Computation withHobs,” Dissertation, RWTH Aachen, 1988.

Y. Ito.Representation of functions by superpositions of a step or sigmoid function and their applications to neural network theory.Neural Networks.(1991).

C.L. Huang et al.Profile correction of a helical gear shaping cutter using the lengthwise-reciprocating grinding method.Mech. Mach. Theory.(2009).

L. Xia et al.A linkage model and applications of hobbing non-circular helical gears with axial shift of hob.Mech. Mach. Theory.(2013).

C.F. Chen et al.Computerized tooth profile generation and analysis of characteristics of elliptical gears with circular-arc teeth.J. Mater. Process. Technol.(2004).

K.-D. Bouzakis, et al.Effect of the Cutting Edge Radius and its Manufacturing Procedure on the Milling Performance of PVD.Coated Cemented Carbide Inserts.In: Annals of the CIRP, 51 (2002), pp. 61-64.

K.-D. Bouzakis, E. Lili, N. Michailidis, O. Friderikos.Manufacturing of Cylindrical Gears by Generating Cutting.Processes: A Critical Synthesis of Analysis Methods.CIRP Annals - Manufacturing Technology, 57 (2) (2008), pp. 676-696.

Bouzakis, K.-D.: Konzept und technologische Grundlagen zur automatisierten Erstellung optimaler Bearbeitungsdaten beim Wälzfräsen. Habilitation, RWTH Aachen, 1980.

Weck M; Winter W; Klocke F; Winkel O : Analysis of Gear Hobbing Processes by Manufacturing Simulation. In:Wissenschaftliche Gesellschaft für Engineering: Research and Development. Volume X.Issue 1. WGP Annals, WGP Eigendruck, Berlin, 2003.

Klocke, F.; Brumm, M.; Weber, G.: Prozesssimulation für Wendeschneidplatten-Wälzfräser. In: Seminar Aktuelle.Entwicklungen beim Vorverzahnen, WZL, RWTH Aachen, 2012.

Lux, S.: Einfluß von Oberflächenstrukturen auf den Verschleiß von Verzahnwerkzeugen aus Schnellarbeitsstahl. Diss. RWTH Aachen, 1997.

Hipke, M.: Wälzfräsen mit pulvermetallurgisch hergestelltem Schnellarbeitsstahl. Dissertation Otto-von-Guericke-Universität Magdeburg, 2012.

Ziegler, K.: Untersuchung der Hauptschnittkraft beim Wälzfräsen von Stirnrädern. Diss. RWTH Aachen, 1967.

Downloads

Published

2023-03-24

Issue

Vol. 12 No. 2 (2022)

Section

Review Articles

License

Declaration and Copyright Transfer Form

(to be completed by authors)

I/ We, the undersigned author(s) of the submitted manuscript, hereby declare, that the above manuscript which is submitted for publication in the STM Journals(s), is not published already in part or whole (except in the form of abstract) in any journal or magazine for private or public circulation, and, is not under consideration of publication elsewhere.

  • I/We will not withdraw the manuscript after 1 week of submission as I have read the Author Guidelines and will adhere to the guidelines.
  • I/We Author(s ) have niether given nor will give this manuscript elsewhere for publishing after submitting in STM Journal(s).
  • I/ We have read the original version of the manuscript and am/ are responsible for the thought contents embodied in it. The work dealt in the manuscript is my/ our own, and my/ our individual contribution to this work is significant enough to qualify for authorship.
  •  I/We also agree to the authorship of the article in the following order:

Author’s name                                    

 

1. ________________

2. ________________

3. ________________

4. ________________

 

We  Author(s) tick this box and would request you to consider it as our signature as we agree to the terms of this Copyright Notice, which will apply to this submission if and when it is published by this journal.