Open Access Open Access  Restricted Access Subscription or Fee Access

Modeling of Sintering Process for the Preparation of Magnetic Abrasives by RSM and ANN Models

mukesh kumar

Abstract


In this study, a modeling has been done for the prediction of the sintering process, as sintering process is one of the best processes to prepare magnetic abrasives. The sintering process is modelled by using RSM and ANN techniques. The ANN model has been developed using a multilayer feed-forward neural network and trained with the help of an error backpropagation learning algorithm based on the generalized delta rule. The indication from results tells that the RSM and ANN modelling techniques can be effectively used for the prediction of the sintering process for the preparation of magnetic abrasives. The results indicate that the prediction capabilities (R2 for Training (.9999), validation (.9999), testing (.7308)) of ANN models are far better as compared to the RSM models.


Keywords


Modeling; RSM (Response Surface Methodology; ANN (Artificial Neural Network); Sintering.

Full Text:

PDF

References


Shinmura T, et al. Study on Magnetic Abrasive Finishing. CIRP Ann. 1990; 39(1): 325 328p.

Chen JC, Savage M. A Fuzzy-Net-Based Multilevel In-Process Surface Roughness Recognition System in Milling Operations. Int J Adv Manuf Technol. 2001; 17(9): 670 676p.

Yamaguchi H, Kang J, Hashimoto F. Metastable Austenitic Stainless Steel Tool for Magnetic Abrasive Finishing. CIRP Ann. 2011; 60(1): 339 342p.

Jain VK, et al. Effect of Working Gap and Circumferential Speed on the Performance of Magnetic Abrasive Finishing Process. Wear. 2001; 250(12): 384 390p.

Hung Ching-Lien, Wei-Liang Ku, Lieh-Dai Yang. Prediction System of Magnetic Abrasive Finishing (MAF) on the Internal Surface of a Cylindrical Tube. Mater Manuf Process. 2010; 25(12): 1404 1412p.

Kumar M, Singh S, Farwaha H. Optimization and Prediction of Sintering Process Parameters for Magnetic Abrasives Preparation Using Response Surface Methodology. International Journal of Data and Network Science. 2019; 3(2): 103 108p.

Vahdati Mehrdad, Seyed Alireza Rasouli. Evaluation of Parameters Affecting Magnetic Abrasive Finishing on Concave Freeform Surface of Al Alloy via RSM Method. Adv Mater Sci Eng. 2016; 2016: Article ID 5256347, 14p.

Mukherjee Indrajit, Pradip Kumar Ray. A Review of Optimization Techniques in Metal Cutting Processes. Comput Ind Eng. 2006; 50(1 2): 15 34p.

Box George EP, Wilson Kenneth B. On the Experimental Attainment of Optimum Conditions. J R Stat Soc B (Methodological). 1951; 13(1): 1 38p.

Montgomery DC. Design and Analysis of Experiments. New York: Wiley; 2003.

Yegnanarayana B. Artificial Neural Networks. PHI Learning Pvt. Ltd.; Jan 14, 2009.




DOI: https://doi.org/10.37591/joeam.v10i3.3419

Refbacks

  • There are currently no refbacks.


Copyright (c) 2019 Journal of Experimental & Applied Mechanics