Design and Fabrication of Electric Car Jack

Authors

  • Shubhaseesh Srivastava Student, Department of Mechanical Engineering, IEC College of Engineering, Greater Noida, Uttar Pradesh, India

DOI:

https://doi.org/10.37591/joaea.v8i3.6186

Keywords:

Electric car jack, vehicle jack, tyre, driving gear, DC electric motor

Abstract

Humans have always been enthralled by new scientific discoveries and technological advancements. The desire to produce something better in order to address the shortcomings of the prior iteration paved the path for ever-increasing technological demands. The automobile industry is another industry where new ideas or inventions are proposed on a daily basis to aid the industry's growth in all ways possible. With new innovations comes the obligation of constantly monitoring and improving the modifications. Vehicles, like any other piece of equipment, are constantly examined for the different repairs that need to be made during their operation. One conceivable area of development is vehicle repair in the case of a breakdown while in use. The bursting of a tyre or any other comparable condition while driving a car can result in a very dangerous situation that puts our lives in jeopardy. So, in this century of rapid change, we present a new technique of fixing a vehicle with the assistance of an electronic car jack that uses an infrared sensor to avoid any catastrophes while driving. The infrared sensor aids in the detection of any tyre position changes. The electric car jack, which comprises of a D.C. motor to automatically lift the vehicle by getting electrical power from the car battery, can be used to repair the vehicle after a change is detected. This device will assist the driver in recognising and correcting damage to any of the tyres with the least amount of human effort.

References

Madhusudhan, B.P.Mahesh, Prabhus hankar.M.R, Development of Electro Mech anical Jack for Auto Levelling Of Vehicles, International Journal of Innovative Rese arch1in Science, Engineering and Technology,11Vol.13, Issue18, August2016.

Sandipan Pawar, Shreeram Shinde, Manish Patil, Farhan Shaikh, Bilal Khan, Design And Manufacturing Of Automatic Bluetooth Operated Bottle Hydraulic Jack.

Journal of Energy Resources Technology (JERT) – Trans. of The ASME, 130 (3):032201-8 & Bhattacharya, C., 2006, Proc. of ASME 2006 Power Conference, pp. 137-145Chang; Shoei D. (Da Li Hsien, TW), Liaw; Huey S. (Da Li Hsien, TW), Motor driven scissor jack for automobiles, U.S Patent Number 4653727, 1987.

Amitkumar, GauravUdgirkar, Rajesh Patil and Nilesh, “Automated Car Jack”, International Journal of Current Engineering and Technology (Vol.4, No.4, Aug 2014) E-ISSN 2277 – 4106, P-ISSN 2347 – 5161.

Rajput, R.K, (2007), ―A Textbook of Manufacturing Technology‖, Laxmi Publications, 1st Edition, 899pp. ISBN: 978 – 81 – 318 – 244 – 1.

VivekKaraveer, AshishMogrekar and T. PremanReynold Joseph, ―Modeling and Finite Element Analysis of Spur Gear‖ International Journal of Current Engineering and Technology (Vol.3, No.5, December 2013) ISSN: 2277 – 4106.

VivekKaraveer, AshishMogrekar and T. PremanReynold Joseph, ―Modeling and Finite Element Analysis of Spur Gear‖ International Journal of Current Engineering and Technology (Vol.3, No.5, December 2013) ISSN: 2277 – 4106.

Balkeswarsingh, ChatpalliwarAshwin S. And Bhoyar Amar A., “Optimizing Efficiency of Square Threaded Mechanical Screw Jack by Varying Helix Angle”, International Journal of Modern Engineering Research (IJMER)(Vol.2, Issue.1, Jan-Feb 2012 pp- 504-508) ISSN: 2249-6645.

BJC (Boston Jacks Corporation). 2008. Jacking beams manufacturer ISO 9002 (BS5750) 500. www.boston-ge.com

FarhadRazzaghi, US. “Apparatus and method for an electric jack” United States Patent Issued on November 8, 2007, Patent Number: US 2007/0256526 A1.

Downloads

Published

2022-03-22

Issue

Vol. 8 No. 3 (2021)

Section

Articles

License

Declaration and Copyright Transfer Form

(to be completed by authors)

I/ We, the undersigned author(s) of the submitted manuscript, hereby declare, that the above manuscript which is submitted for publication in the STM Journals(s), is not published already in part or whole (except in the form of abstract) in any journal or magazine for private or public circulation, and, is not under consideration of publication elsewhere.

  • I/We will not withdraw the manuscript after 1 week of submission as I have read the Author Guidelines and will adhere to the guidelines.
  • I/We Author(s ) have niether given nor will give this manuscript elsewhere for publishing after submitting in STM Journal(s).
  • I/ We have read the original version of the manuscript and am/ are responsible for the thought contents embodied in it. The work dealt in the manuscript is my/ our own, and my/ our individual contribution to this work is significant enough to qualify for authorship.
  •  I/We also agree to the authorship of the article in the following order:

Author’s name                                    

 

1. ________________

2. ________________

3. ________________

4. ________________

 

We  Author(s) tick this box and would request you to consider it as our signature as we agree to the terms of this Copyright Notice, which will apply to this submission if and when it is published by this journal.