Recent Trends in Smart Material in Automobile Industry

Authors

  • Shubhaseesh Srivastava Student, Department of Mechanical Engineering, IEC College of Engineering, Greater Noida, Uttar Pradesh, India

DOI:

https://doi.org/10.37591/joaea.v8i3.6187

Keywords:

Smart material, automobile industry, piezoelectric, actuators, automotive materials.

Abstract

*Author for Correspondence

Shubhaseesh Srivastava

E-mail: [email protected]

 

1Student, Department of Mechanical Engineering, IEC College of Engineering, Greater Noida, Uttar Pradesh, India

 

Received Date: December 24, 2021

Accepted Date: February 24, 2021

Published Date: March 10, 2022

 

Citation: Shubhaseesh Srivastava. Recent Trends in Smart Material in Automobile Industry. Journal of Automobile Engineering and Applications. 2021; 8(3): 21–24p.

The purpose of this article is to investigate the modern application of smart materials and technology to automobiles, which allows for higher degrees of system integration and a reduction in the size and quantity of parts, resulting in increased efficiency and dependability. The advancements and future developments in materials technology for automobile components are examined, with a focus on mechanical transmission applications. Smart materials have a significant advantage in terms of adaptability to a variety of environmental and operating situations. The usage of Nitinol wires in spacecraft in the 1960s was the first practical application of smart materials. Smart materials-based systems have expanded to incorporate a wide range of applications, including autos, construction, medical implants, aerospace applications, chemical plants, architecture, and interior heating, thanks to the discovery of newer classes of materials. The advancements and future developments in materials technology for automobile components are examined, with a focus on mechanical transmission applications. Customers’ wants, legal laws, and technological requirements, such as reduced fuel usage, cost out, environmental regulations, energy diversification, and others, are the key drivers.

References

Gibson, M. A. (2013). “A Review of Shape Memory Alloy Research, Applications and Opportunities”. Materials & Design”.

Huang, S; Leary, Martin; Attalla, Tamer; Probst, K; Subic, A (2012). “Optimization of Ni–Ti shape memory alloy response time by transient heat transfer analysis”. Materials & Design.

Wilkes, K. E (2000). “The fatigue behavior of shape-memory alloys”.

“Smart Materials and Structures”. 2014 Journal Citation Reports. Web of Science (Science- ed.). Thomson Reuters. 2015.

[Available from] https://en.wikipedia.org/wiki/Smart_material.

Frick, L. (2013). Smart Materials Stem From Nature. [online] Machinedesign.com. Available at: https://www.machinedesign.com/materials/article/21833264/smart-materials-stem-from-nature.

Uprm.edu. (2022). Types of Smart Materials. [online] Available at: https://academic.uprm.edu/pcaceres/Undergrad/Smart-Alessandra/id18.htm.

Omicsonline.org. (2016). Smart Materials applications in Automobile Engineering |. [online] Available at: https://www.omicsonline.org/conferences-list/smart-materials-applications-in-automobile-engineering.

A. Airoldi, S. Bertoli, L. Lanzi, M. Sirna och G. Sala, “Design of a Motorcycle Composite Swing-Arm by Means of Multi-Objective Optimization,” Applied Composite Materials, nr 19, pp. 599-618, 2012.

H. Koo, “The Global Middle Class: How Is It Made, What Does It Represent?,” Globalizations, vol. 13, nr 4, pp. 440-453, 2016.

V. Krishnan och K. Ulrich, “Product Development Decisions: A Review of The Literature”, Management Science, vol. 47, nr 1, pp. 1-21, 2001.

D. Unger och S. Eppinger, “Improving Product Development Process Design - A Method For Managing Information Flow, Risks and Iterations”, Journal of Engineering Design, vol. 22, nr 10, pp. 689-699, 2011.

CARLSON, E.; NELSON, K. Nylon Under the Hood. Automotive Engineering. v.104, n.12, p.84-89, Dec. 1996.

TAUB, A. I. Automotive Materials: Technology Trends and Challenges in the 21st Century. MRS Bulletin, v.31, p.336- 343, Apr. 2006.

Farrington, S.D.; Winslow, G.; Yester, S.; Coulter, S. Designing for recycling. Automotive Enginnering. v.105, n. 8, p.46-48, Aug. 1997.

Downloads

Published

2022-03-22

Issue

Vol. 8 No. 3 (2021)

Section

Articles

License

Declaration and Copyright Transfer Form

(to be completed by authors)

I/ We, the undersigned author(s) of the submitted manuscript, hereby declare, that the above manuscript which is submitted for publication in the STM Journals(s), is not published already in part or whole (except in the form of abstract) in any journal or magazine for private or public circulation, and, is not under consideration of publication elsewhere.

  • I/We will not withdraw the manuscript after 1 week of submission as I have read the Author Guidelines and will adhere to the guidelines.
  • I/We Author(s ) have niether given nor will give this manuscript elsewhere for publishing after submitting in STM Journal(s).
  • I/ We have read the original version of the manuscript and am/ are responsible for the thought contents embodied in it. The work dealt in the manuscript is my/ our own, and my/ our individual contribution to this work is significant enough to qualify for authorship.
  •  I/We also agree to the authorship of the article in the following order:

Author’s name                                    

 

1. ________________

2. ________________

3. ________________

4. ________________

 

We  Author(s) tick this box and would request you to consider it as our signature as we agree to the terms of this Copyright Notice, which will apply to this submission if and when it is published by this journal.