Automatic Tyre Inflation And Deflation System in Automobiles

Authors

  • R. P. Jamdar Student of mechanical enginering pune university
  • S.T. Mane
  • S.S. Nimbalkar
  • D.G. Sahoo
  • A.B. Bhane

DOI:

https://doi.org/10.37591/joaea.v6i1.2234

Keywords:

Keywords— Control applications, System engineering, Automotive Pressure measurements, pressure sensor, solenoid valve, pneumatic actuator, air compressor

Abstract

 Modern cars have a lot of features and electronic systems which support the driver in dangerous driving situations. Such systems are not only developed for keeping the cars under control, but they also try to improve the subjective feeling during driving and comfort. One of such systems has the task to measure and control the pressure of the tyres: Automated Tyres Pressure System (ATPS).The system is can be placed in all automobile while long drives and running on paved roadways. The prototype system which is mentioned in this paper is on bad surface road it remove air automatically approximately. And while running on plane surface it alert vehicle sensor signal alert the system and automatically fill air on the tyre in running condition

References

Hemant Soni, Pratik Golar, Ashwin Kherde “DESIGN OF AUTOMATIC

TYRE INFLATION SYSTEM” Vol.1,Issue.4/April. 2014 ISSN: 2347-5420. [2] P. Omprakash, T. Senthil Kumar, “M.A.R.S -Mechanized Air Refilling

System”. [3] Käppler, W., and Godthelp, H., “Effects of Tyre Pressures on Vehicle

Handling”, International Journal of Vehicle Design, vol. 9, no. 4/5, pp.

-532, 1988.

NHTSA - National Highway Traffic Safety Administration, “Federal Motor

Vehicle Safety Standards, Tire Pressure Monitoring Systems; Controls

and Displays”, NHTSA 2000-8572, 49 CFR Part 571, RIN 2127-AI33,

Downloads

Published

2019-05-13

Issue

Vol. 6 No. 1 (2019)

Section

Articles

License

Declaration and Copyright Transfer Form

(to be completed by authors)

I/ We, the undersigned author(s) of the submitted manuscript, hereby declare, that the above manuscript which is submitted for publication in the STM Journals(s), is not published already in part or whole (except in the form of abstract) in any journal or magazine for private or public circulation, and, is not under consideration of publication elsewhere.

  • I/We will not withdraw the manuscript after 1 week of submission as I have read the Author Guidelines and will adhere to the guidelines.
  • I/We Author(s ) have niether given nor will give this manuscript elsewhere for publishing after submitting in STM Journal(s).
  • I/ We have read the original version of the manuscript and am/ are responsible for the thought contents embodied in it. The work dealt in the manuscript is my/ our own, and my/ our individual contribution to this work is significant enough to qualify for authorship.
  •  I/We also agree to the authorship of the article in the following order:

Author’s name                                    

 

1. ________________

2. ________________

3. ________________

4. ________________

 

We  Author(s) tick this box and would request you to consider it as our signature as we agree to the terms of this Copyright Notice, which will apply to this submission if and when it is published by this journal.