Surface Roughness in Traverse Cut Cylindrical Grinding of Phosphor Bronze

Authors

  • Ramesh Rudrapati Assistant Professor, Department of Mechanical Engineering, Institute of Technology, Hawassa University, Ethiopia.
  • Pradip K. Pal
  • Jaiswal N

DOI:

https://doi.org/10.37591/joaea.v6i1.2561

Keywords:

Surface roughness, phosphor bronze, cylindrical grinding, optimization

Abstract

In the present work, traverse cut cylindrical grinding process has been analyzed and optimized to obtain desired surface roughness while machining of phosphor bronze material. Experiments have been planned as per Taguchi’s L16 orthogonal array. Four levels of the input parameters have been used. The parameters are: longitudinal feed, work-speed and in-feed. The results have been studied, plotted and discussed. The effect of process parameters on responses have been analyzed using statistical analysis of signal-to-noise ratio. The single objective optimization has been attempted by using Taguchi’s signal-to-noise ratio concept, for minimization of surface roughness. Confirmatory test has also been done to verify the predicted condition.

References

Ramesh Rudrapati, Pal Pradip K, Jaiswal N. Surface Roughness in Traverse Cut Cylindrical Grinding of Phosphor Bronze. Journal of Automobile Engineering and Applications. 2019; 6(1): 20–24p.

Downloads

Published

2019-05-13

Issue

Vol. 6 No. 1 (2019)

Section

Articles

License

Declaration and Copyright Transfer Form

(to be completed by authors)

I/ We, the undersigned author(s) of the submitted manuscript, hereby declare, that the above manuscript which is submitted for publication in the STM Journals(s), is not published already in part or whole (except in the form of abstract) in any journal or magazine for private or public circulation, and, is not under consideration of publication elsewhere.

  • I/We will not withdraw the manuscript after 1 week of submission as I have read the Author Guidelines and will adhere to the guidelines.
  • I/We Author(s ) have niether given nor will give this manuscript elsewhere for publishing after submitting in STM Journal(s).
  • I/ We have read the original version of the manuscript and am/ are responsible for the thought contents embodied in it. The work dealt in the manuscript is my/ our own, and my/ our individual contribution to this work is significant enough to qualify for authorship.
  •  I/We also agree to the authorship of the article in the following order:

Author’s name                                    

 

1. ________________

2. ________________

3. ________________

4. ________________

 

We  Author(s) tick this box and would request you to consider it as our signature as we agree to the terms of this Copyright Notice, which will apply to this submission if and when it is published by this journal.