Fabrication and Vibration Analysis of a Single-Passenger Car

Authors

  • J. Immanuel Keba Department of Mechanical Engineering, PSN Engineering College, Tirunelveli, India
  • J. Isaac Rajesh Department of Mechanical Engineering, PSN Engineering College, Tirunelveli, India
  • J. Isaac Rajesh Department of Mechanical Engineering, PSN Engineering College, Tirunelveli, India
  • S. Alex Babu Department of Mechanical Engineering, PSN Engineering College, Tirunelveli, India
  • S. Alex Babu Department of Mechanical Engineering, PSN Engineering College, Tirunelveli, India

DOI:

https://doi.org/10.37591/joaea.v1i1.4545

Keywords:

Wishbone structure, gear shift box assembly, auxiliary systems, suspensions, modal analysis.

Abstract

So far the world is trying to make economic, compact car for a single passenger to travel. The authors also took part in such an endeavor to develop a compact 4-wheel car for a single passenger with minding of two main considerations called fuel consumption and travelling comfort. This car is exclusively fabricated for the alteration of two wheelers. Two wheelers give good fuel economy but there will be deficiency in comfort when traveling long distance. For overcoming this factor, the authors have fabricated a single-passenger car by using various auxiliary automobile components from various vehicles for fulfilling their need in an effective manner. In addition to this, the authors have also done vibration analysis for key components of the car for promoting enhancement of vehicle design and make it further successful.

References

Nigade RV. Vibration Analysis of Gearbox Top Cover. Research and Engineering Kirloskar Pneumatic Co Ltd., Pune, Maharashtra, India.

Kumar Ashwani, Behmad Shaik Imran, Patil Pravin P. Thermo-Mechanical and Vibration Analysis of the I.C. Engine Piston Made of SiC Reinforced ZrB2 Composite Using Finite Element Method (ANSYS). Department of Mechanical Engineering, Graphic Era University, Dehradun-248002, India.

Abdullah Oday I, Schlattmann Josef. Vibration Analysis of the Friction Clutch Disc Using Finite Element Method. Institute of Laser and System Technologies, Technical University Hamburg-Harburg, Germany.

Luo Yun, Feng Guoying, Du Yongzhao, et al. The Dynamic Response Analysis of Auto Body Sheets to Node Loads. College of Electronic Information, Sichuan University, Chengdu 610064, China.

Lengvarský Pavol, Bocko Jozef, Hagara Martin. Modal Analysis of Titan Cantilever Beam Using ANSYS and Solid Works. Department of Applied Mechanics and Mechatronics, Technical University of Košice, Košice, Slovakia.

Pedrammehr S, Farrokhi H, Rajab A. Khani Sheykh. Modal Analysis of the Milling Machine Structure through FEM and Experimental Test. School of Mechanical and Aerospace Engineering, Nanyang Technical University, Singapore.

Turgut Gürsel K, Çoban Tufan, Özdamar Aydogan. Vibration Analysis of Rotor Blades of a Farm Wind-Power Plant. Department of Mechanical Engineering, Faculty of Engineering, Ege University, 35100 Bornova – Izmir/Turkey, [email protected].

Pente Sachin, Wankhade Nitin, Bhoyar Pankaj. Vibrational Analysis of a VCR Diesel Engine: A Review. Scholor M.E. CAD/CAM, PRMIT & R, Badnera, Professor, PRMIT & R, Badnera, Assistant professor, JDIET, Yavatmal.

Allaka Gopichand, Kotti Manikanta, Srikanth B, et al. Modal Analysis of a Stepped Bar Using Matlab & Ansys., Department of Mechanical Engineering, Swarnandhra College of Engineering & Technology, Andhra Pradesh-534280.

Wongchai Boonthum, Visuwan Porranat, Chuepeng Sathaporn. The Vibration Analysis of Diesel Engine with Hydrogen-Diesel Dual fuel. Department of Mechanical Engineering, Faculty of Engineering, Kasetsart University, 50 Ngam Wong Wan Rd, Ladyaow Chatuchak Bangkok 10900, Thailand.

Jan Rubacek, Time Effective Transient Analysis Using ANSYS Mechanical and Matlab Simulink, Philips Oral HealthCare.

Srinivasulu NV, Jaikrishna S, Navatha A. PSD analysis of an automobile dash panel. International Journal of Engineering and Innovative Technology (IJEIT). July 2012; 2(1).

Jagirdar VV, Dadar MS, Sulakhe VP. Wishbone Structure for Front Independent Suspension of a Military Truck. Vehicles Research and Development Establishment, Ahmednagar-414006.

Downloads

Published

2020-12-04

Issue

Vol. 1 No. 1 (2014)

Section

Articles

License

Declaration and Copyright Transfer Form

(to be completed by authors)

I/ We, the undersigned author(s) of the submitted manuscript, hereby declare, that the above manuscript which is submitted for publication in the STM Journals(s), is not published already in part or whole (except in the form of abstract) in any journal or magazine for private or public circulation, and, is not under consideration of publication elsewhere.

  • I/We will not withdraw the manuscript after 1 week of submission as I have read the Author Guidelines and will adhere to the guidelines.
  • I/We Author(s ) have niether given nor will give this manuscript elsewhere for publishing after submitting in STM Journal(s).
  • I/ We have read the original version of the manuscript and am/ are responsible for the thought contents embodied in it. The work dealt in the manuscript is my/ our own, and my/ our individual contribution to this work is significant enough to qualify for authorship.
  •  I/We also agree to the authorship of the article in the following order:

Author’s name                                    

 

1. ________________

2. ________________

3. ________________

4. ________________

 

We  Author(s) tick this box and would request you to consider it as our signature as we agree to the terms of this Copyright Notice, which will apply to this submission if and when it is published by this journal.