Braking System in Two Wheelers using Resistance of Air

Authors

  • Sreejith Sreenivasan Assistant Professor, Department of Mechanical Engineering, Saraswati College of Engineering Kharghar, Navi Mumbai, Maharashtra, India

DOI:

https://doi.org/10.37591/joaea.v8i3.6185

Keywords:

Motorcycle brake systems, conventional brakes, combined braking system, hydraulic link, wheelers.

Abstract

In this paper, we look at how motorcycle brake systems come in a variety of designs and technical solutions. An ABS system can be added to a traditional system with two independent circuits to improve safety and stability. By establishing a hydraulic link between the front brake control and the rear calliper, or vice versa, a combined braking system can be constructed to improve safety and comfort. This paper focuses on conventional brakes that are being used in our two-wheeler vehicles, our main focus is on reduce excess pressure that is being develop on our braking systems it may leads to failure of parts or prevent leakage from system. One of the causes of accidents is improper brake use. The goal of the project is to boost the brake safety parameters. The sudden recognition of any item in front of the driver panics the driver, and in this scenario, regular drivers fail to use brakes effectively, resulting in an accident. By considering the driver reaction time, we will strive to aid the driver in avoiding accidents and thereby increasing safety.

References

Surender, J. (2013). Pattern of Injuries in Fatal Road Traffic Accidents in Warangal Area. Journal of Indian Academy of Forensic Medicine, 35(1), 55-59.

Giovannini, F., Savino, G., Pierini, M., & Baldanzini, N. (2013). Analysis of the minimum swerving distance for the development of a motorcycle autonomous braking system. Accident Analysis & Prevention, 59, 170-184.

Jia, B., Lu, G., Wang, Y., & Yu, G. (2013). The Measurement for Performance Parameter of Automobile Braking System with Electronic Vacuum Booster. Procedia-Social and Behavioral Sciences, 96, 2058-2065.

Mirzaeinejad, H., & Mirzaei, M. (2014). Optimization of nonlinear control strategy for anti-lock braking system with improvement of vehicle directional stability on split-μ roads. Transportation Research Part C: Emerging Technologies, 46, 1-15.

Das, B., & Ghosh, A. (1998). A novel control strategy for a braking resistor.International Journal of Electrical Power & Energy Systems, 20(6), 391-403.

Van Elslande, P., & Elvik, R. (2012). Powered two-wheelers within the traffic system. Accident Analysis & Prevention, 49, 1-4.

Rowden, P. J., Watson, B. C., & Haworth, N. L. (2012). Risk taking by motorcyclists: rider training and stages of change. In Australasian Road Safety Research, Policing and Education Conference 2012, 4-6 October 2012, Wellington, New Zealand.

Mansour Hadji, Hosseinlou, Hadi Ahdi and Vahid Hematian “A study of the minimum safe stopping distance between vehicles in terms of braking system, weather and pavement conditions. “Indian Journal of Science and Technology, ISSN:0974-6846, vol.5, No.10, 2012.

Ebner H and Kuhn, W. “Electronic brake force distribution control sophisticated addition to ABS”. SAE Transactions, vol.101, No.6, pp.877-883, 1993.

Jimenez and Felipe, “Analysis of the vehicle Dynamics using Advanced Instrumentation. Fistia World Automotive Congress, Barcelona, 2004.

Chin, Y.K., Lin, W.C., Sidlosky, D.M., and Spurschu, M.S, “Sliding-mode ABS wheel control”, Proceedings of American Control Conference, pp.79-85, 1992.

Hans-Christofklein, “Brake force control and distribution in passengers cars”, Today and in the future, 845062, SAE India, 1984.

Downloads

Published

2022-03-22

Issue

Vol. 8 No. 3 (2021)

Section

Articles

License

Declaration and Copyright Transfer Form

(to be completed by authors)

I/ We, the undersigned author(s) of the submitted manuscript, hereby declare, that the above manuscript which is submitted for publication in the STM Journals(s), is not published already in part or whole (except in the form of abstract) in any journal or magazine for private or public circulation, and, is not under consideration of publication elsewhere.

  • I/We will not withdraw the manuscript after 1 week of submission as I have read the Author Guidelines and will adhere to the guidelines.
  • I/We Author(s ) have niether given nor will give this manuscript elsewhere for publishing after submitting in STM Journal(s).
  • I/ We have read the original version of the manuscript and am/ are responsible for the thought contents embodied in it. The work dealt in the manuscript is my/ our own, and my/ our individual contribution to this work is significant enough to qualify for authorship.
  •  I/We also agree to the authorship of the article in the following order:

Author’s name                                    

 

1. ________________

2. ________________

3. ________________

4. ________________

 

We  Author(s) tick this box and would request you to consider it as our signature as we agree to the terms of this Copyright Notice, which will apply to this submission if and when it is published by this journal.