Comprehensive Analysis of Electric Scooters: Investigating Challenges, Failures And Component Optimization for Enhanced Urban Mobility.

Authors

  • Samuel Edet Bassey University of Uyo

DOI:

https://doi.org/10.37591/joaea.v10i1.7285

Keywords:

renewable energy, global discussion, ecosystem preservation, environmental pollution, critical issue, proactive measures, mitigation, electric scooters, environmental conservation, urban mobility, safety apprehensions, e-scooter design, productivity enhan

Abstract

Renewable energy, a global topic of discussion, has made significant strides in preserving our ecosystem. Environmental pollution stands as a critical issue, necessitating proactive measures for mitigation. The emergence of electric scooters represents a positive step towards environmental conservation; however, their acceptance as urban mobility vehicles is hindered by safety apprehensions. This research delves into e-scooter design, aiming to enhance productivity and address challenges. By identifying accidents and operational failures, underlying factors are pinpointed to facilitate enhancements. A mathematical model is constructed and examined using MATLAB for comprehensive analysis.

Author Biography

  • Samuel Edet Bassey, University of Uyo

    Department of Mechanical and Aerospace Engineering

    Faculty of Engineering

    University of Uyo, Uyo Nigeria.

References

A Current Affair, 2022. Police crack down on rogue e-scooter riders as injuries surge. [Online]

Available at: https://youtu.be/rrERPHYugbo

[Accessed 7 August 2023].

Anon., 2023. wikipedia. [Online]

Available at: https://en.wikipedia.org/wiki/Razor_(scooter)

[Accessed 7 August 2023].

Anon., 2023. Wikipedia. [Online]

Available at: https://en.wikipedia.com/wiki/Scooter_(motorcycle)

[Accessed 1 August 2023].

Bogliettia, S. et al., 2022. First experimental comparison between e-kick scooters and e-bike’s vibration dynamics. Transportation Research Procedia, ELSEVIER B.V., Volume 62, p. 743–751.

Brankovic, A. et al., 2015. Modeling and speed limitation control of an electric kick scooter. Linz, Austria, European Control Conference (ECC).

Corno, M. & Savaresi, S. M., 2015. Design and Control of an All-in-the-Wheel Assisted Kick Scooter. IEEE/ASME Transactions on Mechatronics, pp. 1083-4435.

Gupta, M., Halder, N. & Kharola, D. A., 2019. Design and Fabrication of Low Cost Electric Scooter. International Journal of Multidisciplinary Research and Publications (IJMRAP), 1(12), pp. pp. 12-14.

Inside Edition, 2022. Why Are Some Electric Bikes and Scooters Catching Fire?. [Online]

Available at: https://youtu.be/e-nE-w72Yrg

[Accessed 7 August 2023].

Lee, K.-J., Yun, C. H. & Yun, M. H., 2021. Contextual risk factors in the use of electric kick scooters: An episode sampling inquiry. Safety Science, Elsevier Ltd, 139(105233).

Ma, J. C. & Darsi, V. A. K., 2020. Electric Kick Scooter (ScookE), Karlskrona, Sweden: Department of Mechanical Engineering, Blekinge Institute of Technology.

Puzio, T. J. et al., 2020. The electric scooter: A surging new mode of transportation that comes with risk to riders. Traffic Injury Prevention.

Srinivasan, A. & Singh, S. K., 2007. Design and Development of Electric Scooter, Nagpur, India: Visvesvaraya National Institute of Technology.

Ye, S., 2012. Research on Urban Road Traffic Congestion Charging Based on Sustainable Development. Physics Procedia, Elsevier B.V, p. 1567 – 1572.

Downloads

Published

2023-10-18

Issue

Vol. 10 No. 1 (2023)

Section

Articles

License

Declaration and Copyright Transfer Form

(to be completed by authors)

I/ We, the undersigned author(s) of the submitted manuscript, hereby declare, that the above manuscript which is submitted for publication in the STM Journals(s), is not published already in part or whole (except in the form of abstract) in any journal or magazine for private or public circulation, and, is not under consideration of publication elsewhere.

  • I/We will not withdraw the manuscript after 1 week of submission as I have read the Author Guidelines and will adhere to the guidelines.
  • I/We Author(s ) have niether given nor will give this manuscript elsewhere for publishing after submitting in STM Journal(s).
  • I/ We have read the original version of the manuscript and am/ are responsible for the thought contents embodied in it. The work dealt in the manuscript is my/ our own, and my/ our individual contribution to this work is significant enough to qualify for authorship.
  •  I/We also agree to the authorship of the article in the following order:

Author’s name                                    

 

1. ________________

2. ________________

3. ________________

4. ________________

 

We  Author(s) tick this box and would request you to consider it as our signature as we agree to the terms of this Copyright Notice, which will apply to this submission if and when it is published by this journal.