Green Mobility: Bidirectional Power Conversion and Battery Management in Electric Vehicles

Authors

  • Akhilesh V R Student, Department of Electronics & Communication Engineering PES Institute of Technology and Management Shivamogga, Karnataka, India
  • C Kushal . Student, Department of Electronics & Communication Engineering PES Institute of Technology and Management Shivamogga, Karnataka, India
  • Gagan G N Student, Department of Electronics & Communication Engineering PES Institute of Technology and Management Shivamogga, Karnataka, India
  • Jaswanth M Yadav Student, Department of Electronics & Communication Engineering PES Institute of Technology and Management Shivamogga, Karnataka, India

DOI:

https://doi.org/10.37591/joaea.v10i2.7535

Keywords:

Electric Vehicle, Grid to Vehicle, vehicle to grid, Battery management system

Abstract

The creation and use of an intelligent battery management system and a bidirectional power converter for electric vehicles that can charge their batteries. In the present endeavor, we are using a selection switch to enable the v2g operation made in the place where the EV is parked. This battery charger allows receive energy from the power grid (g2v) and deliver back via the power grid part of the stored battery (v2g). The proposed system is to design a bidirectional power converter, regenerative power supply, and competent the battery management system. This bidirectional EV charger uses an autonomous smart battery management system to facilitate power transmission across devices in both g2v and v2g modes..  The paper offers important insights into the advancement of smart BMS for energy storage systems and the design and implementation of bidirectional power converters for EVs.

References

SONIYA.K.MALODE, R.H.ADWARE, “Regenerative braking system in Electric Bike”, in International Research Journal of Engineering and Technology (IRJET). Volume: 03 Issue: 03 | Mar-2016 ISSN: 2395 -0056

G.MARUTHAIPANDIAN, S.RAMKUMAR, M.MURUGANANDAM, “Implementation of Brushless DC (BLDC) motor technology in Regenerative braking mode”, in International Research Journal of Engineering and Technology (IRJET). Vol. 4, Issue: 2, February 2015 ISSN: 2278 – 8875

F.PELLITTERI ; V.BOSCAINO ; A.O.DI TOMMASO ; F. GENDUSO ; R. MICELI, “E-bike battery charging: Methods and circuits”, in 2013 International Conference on Clean Electrical Power (ICCEP). Issue: 11-13 June 2013

ALI EMADI; YOUNG JOO LEE; KAUSHIK RAJASHEKARA, “Power Electronics and Motor Drives in Electric, Hybrid Electric, and Plug-In Hybrid Electric Vehicles”, in IEEE Transactions on Industrial Electronics.

Marian P. Kazmierkowski , Krzysztof Zymmer “Power Electronic Architecture Of Supply Systems For Electric Vehicle Charging “Proceedings of Electrotechnical Institute,

ISSN0032-6216, LXV, Issue 2

H. Chen, X. Wang, A. Khaligh. "A single stage integrated bidirectional AC/DC and DC/DC converter for plug-in hybrid electric vehicles", IEEE Vehicle Power and Propulsion Conference, 2011.

Yu Fang, Songyin Cao, Yong Xie Pat Wheeler ‘Study on Bidirectional-Charger for Electric Vehicle Applied to Power Dispatching in Smart Grid’ IEEE conc.2016.

. A.K. Verma, Bhim Singh, D.T Shahani ‘Grid to Vehicle and Vehicle to Grid Energy Transfer using Single-Phase Bidirectional AC DC Converter and Bidirectional DC – DC converter’ IEEEcon.,2011.

. Wenhai Yang; Zhanlong Zhang; Jingmin Wang; Yajing Gao, "Simulation of electric vehicle charging station and harmonic treatment," Systems and Informatics (ICSAI), 2012 International Conference on, vol., no., pp.609,613, 19-20 May 2012

. A. K. Singh, M. K. Pathak ``Single-phase bidirectional ac/dc converter for plug-in electric vehicles with reduced conduction losses’’ IET Power Electron., Vol. 11 Iss. 1, pp. 140-148, 2018.

. Ya-Xiong Wang, Fei-Fei Qin, Young-Bae Kim ‘Bidirectional DC-DC Converter Design and Implementation for Lithium-ion Battery Application’ IEEE con 2014

. Marian P. Kazmierkowski , Krzysztof Zymmer “Power Electronic Architecture Of Supply Systems For Electric Vehicle Charging”Proceedings of Electrotechnical Institute, ISSN0032- 6216, LXV, Issue 278, 2018.

Downloads

Published

2023-12-27

Issue

Vol. 10 No. 2 (2023)

Section

Articles

License

Declaration and Copyright Transfer Form

(to be completed by authors)

I/ We, the undersigned author(s) of the submitted manuscript, hereby declare, that the above manuscript which is submitted for publication in the STM Journals(s), is not published already in part or whole (except in the form of abstract) in any journal or magazine for private or public circulation, and, is not under consideration of publication elsewhere.

  • I/We will not withdraw the manuscript after 1 week of submission as I have read the Author Guidelines and will adhere to the guidelines.
  • I/We Author(s ) have niether given nor will give this manuscript elsewhere for publishing after submitting in STM Journal(s).
  • I/ We have read the original version of the manuscript and am/ are responsible for the thought contents embodied in it. The work dealt in the manuscript is my/ our own, and my/ our individual contribution to this work is significant enough to qualify for authorship.
  •  I/We also agree to the authorship of the article in the following order:

Author’s name                                    

 

1. ________________

2. ________________

3. ________________

4. ________________

 

We  Author(s) tick this box and would request you to consider it as our signature as we agree to the terms of this Copyright Notice, which will apply to this submission if and when it is published by this journal.