A Review study on Deep Drawing Analysis of Sheet Metal with Different Materials

Authors

  • Neeraj Sharma Production engineering, Kalinga University
  • Shailesh Singh Thakur

DOI:

https://doi.org/10.37591/joaea.v5i2.822

Keywords:

Deep drawing, FEM, punch tool, bending deep drawing process

Abstract

Deep drawing is one of the maximum vital processes for forming metal steel components.It is widely used for mass manufacturing of cup shapes in car, aerospace and packaging industries. In deep drawing metallic sheet is subjected to high punch stress which causes deformation of material, throughout deformation stresses are generated in numerous zones, which leads to numerous defects. The most important failure modes in sheet metallic elements are wrinkling and fracture. The existence of thickness version within the fashioned component may additionally cause strain awareness and might result in the acceleration of harm. Simulation and FEM analysis of the system through varying method parameters can interpret attention of flowing stresses at some point of deep drawing manner earlier before actual manufacturing of components, consequently, an anticipation of disorder unfastened product can be anticipated earlier than truly going for production.

Keywords: Deep drawing, FEM, Punch tool, Bending Deep drawing process.

References

Mouta Kévin A, Azevedo Lucas D, Fernandes Maria G. Sheet Metal Forming Numerical Simulations: 2d and 3d Axisymmetric Deformation of a Cylindrical Piece. 7th International Conference on Mechanics and Materials in Design, Albufeira/Portugal. Jun 2017.

Prashant Dudhat, Sagar Bagasariya, Ashish Khunt. Study of Deep Drawing Process – A Review. International Journal for Innovative Research in Science & Technology (IJIRST). Jan 2017; 3(08): 103–106p.

Ali Hassan Saleh, Ammer Khalaf Ali. Development Technique for Deep Drawing without Blank Holder to Produce Circular Cup of Brass Alloy. International Journal of Engineering & Technology (IJET). 2015; 4(1): 187–195p.

Ionela Iordan, Constantin Dogariu, Cristina Mohora. Finite Element Analysis for Deep Drawing Process and Part Shape Optimization. AMM. 2015; 811: 92–96p.

Chaudhari SS, Patil Navneet K. Effect of Process Parameters on Spring Back in Deep Drawing: A Review. International Journal of Engineering Development and Research (IJEDR). 2015; 3(4): 906–912p.

Van Quang Nguyen, Balamurugan Ramamurthy, Jau-Wen Lin. Optimization of Influential Process Parameters on the Deep Drawing of Aluminium 6061 Sheet Using Taguchi and Finite Element Method. Trans Can Soc Mech Eng. 2015; 39(3): 605–614p.

Nithin Kumar J, Gopi Chand D, Chandra Shekar N. Finite Element Analysis of Sheet Metal Works for Deep Drawing in Manufacturing of Fly Wheel Cup. International Journal of Engineering Research & Technology (IJERT). Sep 2014; 3(9).

Mohan Krishna K, Kumara Swamy M. Prediction of Draw Ratio in Deep Drawing through Software Simulations. International Refereed Journal of Engineering and Science (IRJES). Dec 2014; 3(12): 24–29p.

Joshi Ketaki N, Patil Bhushan T, Sunil Satao. Review of Optimization Aspects for Metal Forming Process. Engineering Science and Technology: An International Journal (ESTIJ). Apr 2014; 4(2): 71–75p.

El Sherbiny M, Zein H, Abd-Rabou M. Thinning and Residual Stresses of Sheet Metal in the Deep Drawing Process. Elsevier, Mater Des. 2014; 55: 869–879p.

Ramesh Kanttikar, Kodli Bharath S, Chikmeti Ravi B. Analysis on Deformation Process in Deep Drawing of Sheet Metal Part by FEM. IOSR Journal of Mechanical and Civil Engineering (IOSR-JMCE). 2014; 11(4): 06–16p.

Ravikant Patel, Manish Raj, Akshay Kumar. Finite Element Simulation for Determining the Optimum Blank Shape for Deep Drawing Process. Int Journal of Engineering Research and Applications (IJERA). Nov 2014; 4(11): 94–100p.

Pranavi U, Venkateshwar Reddy P, Perumalla Janaki Ramulu. Formability Studies on Aluminum Alloy Sheets through Deep Drawing Process. Design and Research Conference (AIMTDR 2014), IIT. Dec 12th–14th, 2014.

Zugasti, Murillo, Castillo. Sheet Metal Blank Development of a Deep Drawing Fan Support Using Theoretical Rules and FEM. International Mechanical Engineering Congress and Exposition, IMECE2014. Nov 14–20, 2014.

Downloads

Published

2018-09-13

Issue

Vol. 5 No. 2 (2018)

Section

Articles

License

Declaration and Copyright Transfer Form

(to be completed by authors)

I/ We, the undersigned author(s) of the submitted manuscript, hereby declare, that the above manuscript which is submitted for publication in the STM Journals(s), is not published already in part or whole (except in the form of abstract) in any journal or magazine for private or public circulation, and, is not under consideration of publication elsewhere.

  • I/We will not withdraw the manuscript after 1 week of submission as I have read the Author Guidelines and will adhere to the guidelines.
  • I/We Author(s ) have niether given nor will give this manuscript elsewhere for publishing after submitting in STM Journal(s).
  • I/ We have read the original version of the manuscript and am/ are responsible for the thought contents embodied in it. The work dealt in the manuscript is my/ our own, and my/ our individual contribution to this work is significant enough to qualify for authorship.
  •  I/We also agree to the authorship of the article in the following order:

Author’s name                                    

 

1. ________________

2. ________________

3. ________________

4. ________________

 

We  Author(s) tick this box and would request you to consider it as our signature as we agree to the terms of this Copyright Notice, which will apply to this submission if and when it is published by this journal.