Design and Optimization of tooth Profile Modification of Spur Gear by FEA Approach

Authors

  • Raju Singh Student Scholar Mechanical Engineering Department, SISTEC Gandhi Nagar Bhopal, India.
  • Mousam Sharma

DOI:

https://doi.org/10.37591/joaea.v5i2.884

Keywords:

Spur Gear, addendum, CATIA, ANSYS

Abstract

The most important component in vehicle is Gear, In order to accomplish high load carrying capacity with reduced weight of gear drives but with increased strength in gear transmission, gear tooth stress analysis, tooth modifications and design of gear drives are becoming major research area. The failure of  gear teeth occurs for particular reason such as high load carrying capacity, high speed rotation etc. The bending stress is largest in the root fillet radius of the gear teeth. So the modified fillet radius gives reduction of bending stress and contact stress .The goals of the existing study is  the to study the effect of tooth stresses and tooth deflection in spur gear drive , to study the effects of these performance parameter in the addendum and centre distance modified spur gears at critical zones of single tooth contact and to develop a technique to design and model spur gears. The performing constraints of standard and spur gear gears were determined through Finite Element Analysis (FEA). Thus the proposed design (circular root fillet) withstands higher bending strength rather than the standard root fillet design.

Downloads

Published

2018-09-06

Issue

Vol. 5 No. 2 (2018)

Section

Articles

License

Declaration and Copyright Transfer Form

(to be completed by authors)

I/ We, the undersigned author(s) of the submitted manuscript, hereby declare, that the above manuscript which is submitted for publication in the STM Journals(s), is not published already in part or whole (except in the form of abstract) in any journal or magazine for private or public circulation, and, is not under consideration of publication elsewhere.

  • I/We will not withdraw the manuscript after 1 week of submission as I have read the Author Guidelines and will adhere to the guidelines.
  • I/We Author(s ) have niether given nor will give this manuscript elsewhere for publishing after submitting in STM Journal(s).
  • I/ We have read the original version of the manuscript and am/ are responsible for the thought contents embodied in it. The work dealt in the manuscript is my/ our own, and my/ our individual contribution to this work is significant enough to qualify for authorship.
  •  I/We also agree to the authorship of the article in the following order:

Author’s name                                    

 

1. ________________

2. ________________

3. ________________

4. ________________

 

We  Author(s) tick this box and would request you to consider it as our signature as we agree to the terms of this Copyright Notice, which will apply to this submission if and when it is published by this journal.