Review on Design and Development of Hydrogen Production System using HHO Dry Cell Method
DOI:
https://doi.org/10.37591/joaest.v7i2.2059Abstract
The current work aims to review an experimental setup for the production of HHO gas. It involves the production of HHO gas by dry cell method, and selecting an appropriate electrolyte for production of HHO gas. The system involves sizing and selection of components like bubbler, measuring devices, moisture removal dryer and safety device like flash back arrestor. HHO gas thus produced can be used in a brazing, welding and burner touch, etc. The experiment proposes the production of HHO gas from renewable sources like PV to enable conversion of energy in desired usable form. Here we have developed a 1 to 1.5 LPM of HHO production by a two cell stack series using 12 plate of SS-316L. The plate size is 7*7 mm, which is 1.5 mm thick and produces a flame by varying the concentration of KOH with water.
Keywords: Electrolysis, Hydrogen cell, HHO gas production, Operating parameter, Changing Concentration electrolyte, Safety component, Burner application
Cite this Article
Chauhan Krishna K. Review on Design and Development of Hydrogen Production System using HHO Dry Cell Method. Journal of Alternate Energy Sources and Technologies. 2016; 7(2): 56–59p.
Downloads
Published
Issue
Section
License
It is herein agreed that: The copyright to the above-listed unpublished and original article is transferred to STM Journals. This copyright transfer covers the exclusive right to reproduce and distribute the contribution, including reprints, translations, photographic reproductions, microform, electronic form (offline, online), or any other reproductions of similar nature. I/We declare that above manuscript is not published already in part or whole (except in the form of abstract) in any journal or magazine for private or public circulation, and, is not under consideration of publication elsewhere. I/ We warrant(s) that his/her/their contribution is original, except for such excerpts from copyrighted works as may be included with the permission of the copyright holder and author thereof, that it contains no libelous statements, and does not infringe on any copyright, trademark, patent, statutory right, or propriety right of others. I/We will not publish his/her/their above said contribution anywhere else without the prior written permission of the publisher unless it has been changed substantially.
I/We also agree to the authorship of the article in the following order:
Author(s) Name Signature(s)
1. ________________
2. ________________
3. ________________
4. ________________
The author(s) agree to the terms of this Copyright Notice, which will apply to this submission if and when it is published by this journal (comments if any to the editor can be added below).
