Design and Construction of Solar Still-Solar Water Heater Hybrid for Small Scale Application
DOI:
https://doi.org/10.37591/joaest.v8i2.313Abstract
Abstract
Solar still-solar water heater hybrid for small scale application has been designed and constructed and tested in this study. The construction began with designing and developing isolated units of single-slope solar still, solar water heater and water storage tank separately. These were then coupled together to form the hybrid system. To test its efficacy, the hybrid was subjected to perform distillation alongside a conventional type single-slope solar still of the same dimensions under the same atmospheric conditions for seven days. At the end of the experimental test, it was discovered that the highest water and glass temperatures (55 and 43°C) were recorded for the hybrid still as against the conventional still with 45 and 38°C for water and glass respectively. The average daily cumulative yield of distilled water obtained from solar still-solar water heater hybrid was found to be 440 ml and that of conventional single slope solar still was 155 ml. It was concluded that the performance of hybrid still is greater than that of conventional still of the same dimension under the same operating conditions.
Keywords: Solar still, solar heater, hybrid
Cite this Article
Muhammad Sabiu Bala, Saidu Aminu, Umar Sadik, Aliyu Aminu Safana, Adamu Ibrahim Usman. Design and Construction of Solar Still-Solar Water Heater Hybrid for Small Scale Application. Journal of Alternate Energy Sources and Technologies. 2017; 8(2): 11–16p.
Downloads
Published
Issue
Section
License
It is herein agreed that: The copyright to the above-listed unpublished and original article is transferred to STM Journals. This copyright transfer covers the exclusive right to reproduce and distribute the contribution, including reprints, translations, photographic reproductions, microform, electronic form (offline, online), or any other reproductions of similar nature. I/We declare that above manuscript is not published already in part or whole (except in the form of abstract) in any journal or magazine for private or public circulation, and, is not under consideration of publication elsewhere. I/ We warrant(s) that his/her/their contribution is original, except for such excerpts from copyrighted works as may be included with the permission of the copyright holder and author thereof, that it contains no libelous statements, and does not infringe on any copyright, trademark, patent, statutory right, or propriety right of others. I/We will not publish his/her/their above said contribution anywhere else without the prior written permission of the publisher unless it has been changed substantially.
I/We also agree to the authorship of the article in the following order:
Author(s) Name Signature(s)
1. ________________
2. ________________
3. ________________
4. ________________
The author(s) agree to the terms of this Copyright Notice, which will apply to this submission if and when it is published by this journal (comments if any to the editor can be added below).
