BY USING FLYWHEEL TO PRODUCE ELECTRICITY WITH POWER MULTIPLICATION

Authors

  • Naveen Reddy Pothula Department of Mechanical Engineering VITS (N6), Karimnagar, Telangana, India-505001

DOI:

https://doi.org/10.37591/jocc.v5i3.1396

Abstract

Electricity production using conventional methods consume lot of energy, utilize from the fuels and  which in turn converted from one source of energy  to another. To produce free energy  experiments conducted on  the perpetual motion states that it is practically impossible to run a machine on the perpetual  motion 100 percent . Instead of pursuing on perpetual motion, when we support the perpetual motion with slight energy boost just before the halt their will be energy efficiency in certain existing electrical production systems. From the case study  “POWER MULTIPLICATION BY FLYWHEEL” By Mr.changanti bhaskar Flywheel energy storage systems (FESS) employ kinetic energy stored in a rotating mass with very low frictional losses.  Electric energy input accelerates the mass to speed via an integrated motor-generator.  The energy is discharged by drawing down the kinetic energy using the same motor-generator. This process of converting different types of energy is the modern way of producing power or electricity. Flywheel   once reached certain RPM will continue motion because of inertia This paper deals with the concept of producing  electrical energy using flywheel. So when we combine both  above systems then there will be partial perpetual motion which produce electricity with the efficiency of almost 320 time  the power or fuel consumed to produce the power.

References

L. Zhou and Z. Qi, ―Review of Flywheel Energy Storage System, Proceedings of ISES Solar World Congress 2007, Beijing, China, Sept. 2007, pp.2815-2819.

H. Ibrahim, A. Ilinca, and J. Perron, ―Energy Storage Systems—Characteristics and Comparisons, J. of Renewable and Sustainable Energy Reviews,

Filatov and E. Maslen, “Passive magnetic bearing for flywheel energy storage systems”, IEEE Trans. Magn., vol. 37. No. 6, pp. 3913-3924, 2001

Downloads

Additional Files

Published

2019-02-01

Issue

Vol. 5 No. 3 (2018)

Section

Articles

License

Declaration and Copyright Transfer Form

(to be completed by authors)

I/ We, the undersigned author(s) of the submitted manuscript, hereby declare, that the above manuscript which is submitted for publication in the STM Journals(s), is not published already in part or whole (except in the form of abstract) in any journal or magazine for private or public circulation, and, is not under consideration of publication elsewhere.

  • I/We will not withdraw the manuscript after 1 week of submission as I have read the Author Guidelines and will adhere to the guidelines.
  • I/We Author(s ) have niether given nor will give this manuscript elsewhere for publishing after submitting in STM Journal(s).
  • I/ We have read the original version of the manuscript and am/ are responsible for the thought contents embodied in it. The work dealt in the manuscript is my/ our own, and my/ our individual contribution to this work is significant enough to qualify for authorship.
  •  I/We also agree to the authorship of the article in the following order:

Author’s name                                    

 

1. ________________

2. ________________

3. ________________

4. ________________

 

We  Author(s) tick this box and would request you to consider it as our signature as we agree to the terms of this Copyright Notice, which will apply to this submission if and when it is published by this journal.