Open Access Open Access  Restricted Access Subscription or Fee Access

A Study of Flow Analysis Within a Tractor Cabin with the Goal of Determining the Best Vent Location and Glazing

Sai Rumde*, Kunal Thakare, Harsh Chavan, Rijul Kotian


This study aims to improve the thermal comfort inside a tractor cabin by determining the position of the air conditioner vent location. This is obtained by maintaining the cold air flow inside the cabin by means of the air conditioning vents and proper HVAC systems. The concept of glazing on windows with different materials was also used to improve the thermal comfort of the tractor cabin by reducing the thermal conductivity. Variations in thermal comfort were tested by creating a 3D model of the tractor cabin with different vent locations as per the model of actual tractor cabin with vent locations as follows, dashboard and side pillars. To evaluate the thermal comfort, the anticipated mean vote (PMV) and expected percentage of unsatisfied were utilized, and the temperature, air velocity, and humidity for calculating PMV were simulated. The temperature and PMV measurement sites were chosen based on the SAE J1503 temperature measuring positions. Using suitable data, CFD simulations were performed on commercial simulation software (STAR-CCM+). Based on the result of the analysis, it was observed that maximum thermal comfort was obtained by placing the air conditioner vent on the dashboard which helped in cooling the tractor cabin in less time than the other vent locations. Considering the correct air conditioner vent location together with the spectral solar radiation effect, the average cabin temperature was, which waslower than other vent locations. When exposed to hot temperature conditions, a vehicle's structure can absorb a large quantity of heat. 50-70 percent of this heat passes through the glazing and boosts the internal cabin air temperature as well as the temperature of the interior trim surfaces. When driving away, the air conditioning system must be capable of quickly eliminating this heat, allowing the occupants to return to a comfortable state in a reasonable amount of time. (124).  We achieved optimum comfort and a desirable temperature range, we improved working conditions of the operator in a tractor. By using different glazing material, we aim to study and improve operator’s thermal comfort. A 3D based computational fluid dynamics (CFD) software will be used to analyze climate in the tractor vehicle cabin.


Thermal Comfort, Computational fluid dynamics (CFD), Tractor cabin, Vent position determination, predicted mean vote (PMV), Predicted Percentage of Dissatisfied (PPD), Glazing

Full Text:



Sai Rumde, Kunal Thakare, Rijul Kotian, Harsh Chavan “A review on Flow Analysis inside a tractor cabin selecting vent location and Glazing”. IRJET, 12–12–2020; Vol. 7, Issue 12.

Jooseon Oh, Kyujeong Choi, Gwan-hee Son, Young-Jun Park, Young-Sun Kang, Young-Joo Kim “Flow analysis inside tractor cabin for determining air conditioner vent location Computers and Electronics in Agriculture” Elsevier 27–12–2019.

Neelkandan Kandasamy, koundinya Narasimha Kota And Prasad Joshi “Numerical evaluation of vehicle orientation and glazing material impact on cabin climate and occupant thermal comfort” 01–10–2017.

Jin Woon Lee, Eun Young Jang, Hong Sun Ryou, Sangyeol Choi, Yongsuk Kim Influence of the spectral solar radiation on the air flow and temperature distributions in a passenger compartment International Journal of Thermal Sciences Elsevier 21–07–2013.

Kerry Kirwan “Automotive Glazing Materials and Manufacturing Ceramics and Glasses Wiley” online library 3 October 2014.

Anderson, J.D., Wendt, J., 1995. Computational Fluid Dynamics Vol. 206 McGraw-Hill, New York.

Chien, H., Jang, J.Y., Chen, Y.H., Wu, S.C., 2008. 3–D numerical and experimental analysis for airflow within a passenger compartment. Int. J. Automot. Technol. 9, 437–445.

Currle, J., 1997. Numerical simulation of the flow in a passenger compartment and evaluation of the thermal comfort of the occupants. SAE 970529.

Currle, J., Maue, J., 2000. Numerical study of the influence of air vent area and air mass flux on the thermal comfort of car occupants. SAE 2000–01–0980.

Fanger, P.O., 1972. Thermal Comfort. McGraw-Hill, US.

Rugh John P. & Hendricks Terry J. “Effect of Solar Reflective Glazing on Ford Explorer Climate Control, Fuel Economy, and Emissions” NREL, 2001–01–3077

Fayazbakhsh, M. and Bahrami, M., "Comprehensive Modeling of Vehicle Air Conditioning Loads Using Heat Balance Method," SAE Technical Paper 2013–01–1507, 2013, doi:10.4271/2013–01–1507.

Ivanescu, M., Neacsu, C.A., Tabacu, I., 2010. Studies of the thermal comfort inside of the passenger compartment using the numerical simulation. International Congress Motor Vehicles & Motors, Kragujeac.


  • There are currently no refbacks.