Recovery of Iron Values from Iron Ore Slimes using Reagents
Keywords:
Iron ore slime, Tailing dams, Gravity, Enhanced gravity separator, ReagentAbstract
Mining wastes include waste generated during the extraction, beneficiation or processing of minerals like iron ore fines, slimes and tailings. Approximately 10–20% of the raw material is discarded as slimes in to slime ponds/tailing dams. Recovery of iron values from slimes result in economic benefit by utilization of waste as a resource and minimizes the threat to the environment. The iron ore slime is generally considered as waste due to its ultrafine nature and its processing limitations. The chemical analysis of the present iron ore slime is 34.75% Fe with 21.94% SiO2, and 14.4% Al2O3. This research work presents the route to size enlargement of slime using reagents and enrichment of iron values by various beneficiation techniques for the effective utilization of iron ore slime. Screen analysis revealed that 90% of the particles are smaller than 80.15 µm. In the present investigation, the recovery of lost iron values from iron ore slime waste was attempted using different beneficiation techniques like Enhanced gravity separation (EGS) Falcon concentrator, Gravity separation by Mineral separator and Vanner, and selective flocculation after treatment with various reagents. Mineral separator generated a concentrate assaying 46.3% Fe with 56.2% recovery using polyacrylamide flocculant at 90 sec collection time and similarly Vanner produced a concentrate assaying 54.5% Fe with a recovery of 41.6% using CMC. From selective flocculation studies, a concentrate assaying 45.3% Fe with 42.1 yield % was obtained using modified corn starch at a settling time of 5 min, as starch facilitates the selective adsorption on iron particles, which in turn leads to enhancement in selectivity and recovery.Downloads
Published
Issue
Section
License
Declaration and Copyright Transfer Form
(to be completed by authors)
I/ We, the undersigned author(s) of the submitted manuscript, hereby declare, that the above manuscript which is submitted for publication in the STM Journals(s), is not published already in part or whole (except in the form of abstract) in any journal or magazine for private or public circulation, and, is not under consideration of publication elsewhere.
- I/We will not withdraw the manuscript after 1 week of submission as I have read the Author Guidelines and will adhere to the guidelines.
- I/We Author(s ) have niether given nor will give this manuscript elsewhere for publishing after submitting in STM Journal(s).
- I/ We have read the original version of the manuscript and am/ are responsible for the thought contents embodied in it. The work dealt in the manuscript is my/ our own, and my/ our individual contribution to this work is significant enough to qualify for authorship.
- I/We also agree to the authorship of the article in the following order:
Author’s name
1. ________________
2. ________________
3. ________________
4. ________________
| We Author(s) tick this box and would request you to consider it as our signature as we agree to the terms of this Copyright Notice, which will apply to this submission if and when it is published by this journal. |