Open Access Open Access  Restricted Access Subscription or Fee Access

Review on Challenges in Drilling Non-metals

Dr. Kondapalli Siva Prasad

Abstract


Drilling is widely used in manufacturing industry and can be easily performed on all materials. It is well known that drilling produces under size of the hole and we need to carry out further operations like boring to get the exact dimensions. When coming to nonmetals like composites maintaining the dimenions in drilling operations is a critical task, as they are laminated with different materials and chances of defects present in the composite. In this paper an attempt is made to gather information on various difficulties observed during drilling of composite materials.


Keywords


compites, drilling

Full Text:

PDF

References


L. M. P. Durao, A. G. Magalhaes, A. T. Marquesb, Joa Manuel R. S. Tavares, Effect of Drilling Parameters on Composite Plates Damage, International conference HSIMP 2007, senlis, France 13-14 November 2007, pp.1-8.

Hamzeh Shahrajabian, Mostafa Hadi, Masoud Farahnakian, Experimental Investigation of Machining Parameters on Machinability of Carbon Fiber/Epoxy Composites, International Journal of Engineering and Innovative Technology (IJEIT), Volume 2, Issue 3, September 2012, pp.30-36.

Fei Gao, Xitian Tian , Shunuan Liu, Bo Li , The Simulation on Drilling of Carbon Fiber Reinforced Plastic Composites, The 2nd International Conference on Computer Application and System Modeling (2012),pp.1215-1218.

P.P.Patil, N.B.Gurule, Optimization on delamination of cutting parameter during drilling on GFRP plastics based on Taguchi Method, International Journal of Mechanical and Production Engineering, Volume- 1, Issue- 4, Oct-2013,pp.37-42.

V. A. Phadnis1, A. Roy, V. V. Silberschmidt, Finite element analysis of drilling in carbon fiber reinforced polymer composites, Journal of Physics: Conference Series 382, 2014,PP.1-7.

P. Y. Andoh, F. Davis, J. Antonio, Prediction of a delamination area during drilling of carbon composite laminates structures, Journal of Science and Technology, Vol. 31, No. 2 ,2011, pp. 120-134.

M. K. A Mohd Ariffin, M. I. Mohd Ali, S. M. Sapuan , N. Ismail, An optimise drilling process for an aircraft composite structure using design of experiments, Scientific Research and Essay Volume.4 ,Issue.10, October 2009, pp. 1109-1116.

S.Madhavan, S.Balasivanandha Prabu, An Experimental Study of Influence of Drill Geometry on Drilling of Carbon Fibre Reinforced Plastic Composites, International Journal of Engineering Research and Development, Volume 3, Issue 1 ,August 2012, pp. 36-44.

Mitesh Gohil, Ayanesh Y Joshi, Sankalp B Bhatiya , An Overview of Influence of Process Parameters in Case of Drilling of Composites, Vol.4, Issue.4, April 2014, pp.172-173.

Hari Singh, Abhishek Kamboj, Sudhir Kumar, International Journal of Chemical, Nuclear, Materials and Metallurgical Engineering Vol:8, No:4, 2014, pp.281-286.

D. Chandramohan , K.Marimuthu, Drilling of Natural Fiber Particle Reinforced Polymer Composite Material, International Journal of Advanced Engineering Research and Studies, Vol. 1, Issue.1,October-December, 2011, pp.134-145.

Marilena Colt-Stoica, Dorel Anania, Cristina Mohora, Daniel Stoica, Defects in Composite Materia caused by Drilling in Manufacturing Process,pp.27-29.

Mihai-Bogdan Lazar, Cutting Force Modelling for Drilling of Fiber-Reinforced Composites, doctorial thesis, Swiss Federal Institute of Technology Lausanne,2012.

M. Ramesh, K. Palanikumar, K. Hemachandra Reddy, Experimental Investigation and Analysis of Machining Characteristics in Drilling Hybrid Glass-Sisal-Jute Fiber Reinforced Polymer Composites, 5th International & 26th All India Manufacturing Technology, Design and Research Conference (AIMTDR 2014) December 12th–14th, 2014, IIT Guwahati, Assam, India ,pp.461-1 to 461-6.

B.Ramesh , A.Elayaperumal , D.Ajay Balaji , N.Rakesh , Optimization of ovality on drilling

glass fiber reinforced plastic composites with coated tungsten carbide tool, International Journal of Innovative Research in Science, Engineering and Technology, Volume. 2, Issue 7, July 2013, pp.2801-2809.

S Jayabal , U Natarajan, Influenece of cutting parameters on thrust force and torque in drilling of E-glass/Poyester composites, Indian Journal of Engineering & Materials Sciences, Vol.17, December 2010,pp.463-470.

J. Sedlacek, M. Slany, Analysis of delamination in drilling of composite materials, M M Science Journal, June 2010, pp.196-197.

R. Vimal Sam Singh, B.Latha, and V.S.Senthilkumar, Modeling and Analysis of Thrust Force and Torque in Drilling GFRP Composites by Multi-Facet Drill Using Fuzzy Logic, International Journal of Recent Trends in Engineering, Volume. 1, Number. 5, May 2009, pp. 66-70.

B.C. Routara, A.K. Sahoo, Akshay K. Rout, A. K. Parida and J. R. Behera, Analysis of machining characteristics in drilling of GFRP composite with application of fuzzy logic approach, International Journal of Industrial Engineering Computations , Volume.4, 2013, pp. 447–456.

Marta Fernandes, Chris Cook, Drilling of carbon composites using a one shot drill bit. Part I: Five stage representation of drilling and factors affecting maximum force and torque, International Journal of Machine Tools & Manufacture, Volume. 46, 2005, pp. 70–75.

Biren Desai, Jaypalsinh Rana, Hiren Gajera, Study of hole quality parameters in drilling of carbon fiber reinforced plastics (CFRP) using design of experiments, Journal of Information, Knowledge and Research in Mechanical Engineering, Volume.2, Issue.2, pp.461-465.

Anil Jindal, Dr. V. K. Singla, Experimental Investigation of Process Parameters in drilling operation using different software technique, An International Journal of Engineering Sciences, Vol. 1, July 2011, pp.135-154.

Hussein M Ali, Asif Iqbal , Li Liang, A comparative study on the use of drilling and milling processes in hole making of GFRP composite, Sadhana, Vol. 38, Part 4, August 2013, pp. 743–760.

Mihaiela Iliescu, Alexandru Patrascu, Research on Regression Models of Force in Drilling Mineral Composite Material 2% Glass Fiber Reinforced, Advances in Production, Automation and Transportation Systems, pp.141-146.

Elias George K, Varadarajan A.S, Rani Joseph, Influence of Process Parameters on Cutting Force and Torque of Drilling of Glass Fiber Reinforced Epoxy Composites, International Journal of Computer Technology and Electronics Engineering (IJCTEE) Volume 2, Issue 2, April 2012,pp.26-31.

B.Shivapragash, K.Chandrasekaran, C.Parthasarathy, M.Samuel, Multiple Response Optimizations in Drilling Using Taguchi and Grey Relational Analysis, International Journal of Modern Engineering Research, Vol.3, Issue.2, March-April. 2013 pp-765-768.

Luis Miguel P. Durao, Daniel J. S. Gonçalves, Joao Manuel R. S. Tavares, Victor Hugo C. de Albuquerque, A. Aguiar Vieira, A. Torres Marques, Drilling tool geometry evaluation for reinforced composite laminates, pp.1-24.

Tian Xia, Investigation of drilling performance in cryogenic drilling on CFRP composite laminates, Theses and Dissertations--Mechanical Engineering, 2014, University of Kentucky.

Ahmad Mayyas, Awni Qasaimeh, Khalid Alzoubi, Susan Lu, Mohammed T. Hayajneh, Adel M. Hassan, Modeling the Drilling Process of Aluminum Composites Using Multiple Regression Analysis and Artificial Neural Networks, Journal of Minerals and Materials Characterization and Engineering, Volume.11,2012, pp.1039-1049.

Luis Miguel P. Durao , Joao Manue R.S. Tavares , Victor Hugo C. de Albuquerque, Jorge Filipe S. Marques and Oscar N.G. Andrade , Drilling Damage in Composite Material, Materials , Volume.7,2014,pp. 3802-3819.

Athulan Vijayaraghavan, Drilling of Fiber-Reinforced Plastics - Tool Modeling and Defect Prediction, Thesis,2007.

Shashidhar Madiwal, Analysis of surface finish in drilling of composites using Neural Networks,Karnatk University,2006.

Mohammed Naeem, Mike Wakeham, Laser percussion drilling of coated and uncoated aerospace materials with a high beam quality and high peak power lamp pumped pusled ND: YAG LASER, pp.111-120.


Refbacks

  • There are currently no refbacks.