A Technical Review on Evaluation of Vegetable Oil in Water-Emulsion Cutting Fluid in Machining Steel with Coated Carbide Tool

Authors

  • Kunj Patel
  • Vikas Ramoliya
  • Bhaumik Prajapati
  • Akash Shukla

Keywords:

Surface roughness, tool wear, minimum quantity lubrication (MQL), metal cutting fluids, vegetable oil based cutting fluid

Abstract

In metal cutting industries, Metal working fluids (MWFs) or Metal cutting fluids (MCFs) are used; they act as coolant as well as lubricant. In industries synthetic and petroleum based cutting fluid as well as coolant produce negative effect on human health, ecology and environment. When tool and work piece are engaged with each other while machining due to engagement they produce heat. The metal cutting fluids effect on heat generation and maintain temperature. Every machining process having tool wear is a natural phenomenon and it leads to tool failure. Metal cutting fluids effect on tool wear, surface roughness, temperature, etc. This technical review paper deals with the studying effect of vegetable oil instead of petroleum based cutting fluids on machining of steel. This review paper helps in understanding various parameters that are affected while using vegetable oil as cutting fluids. The results of the various researches in same field have been analysed and studied.

Cite this Article

Kunj Patel, Vikas Ramoliya, Bhaumik Prajapati, et al. A Technical review on evaluation of vegetable oil in water-emulsion cutting fluid in machining steel with coated carbide tool. Journal of Materials & Metallurgical Engineering. 2017; 7(3):  26–34p. 

Author Biographies

  • Kunj Patel

    Department of Mechanical Engineering, Vadodara Institute of Engineering, Gujarat Technological University, Vadodara, Gujarat, India

  • Vikas Ramoliya

    Department of Mechanical Engineering, Vadodara Institute of Engineering, Gujarat Technological University, Vadodara, Gujarat, India

  • Bhaumik Prajapati

    Department of Mechanical Engineering, Vadodara Institute of Engineering, Gujarat Technological University, Vadodara, Gujarat, India

  • Akash Shukla

    Department of Mechanical Engineering, Vadodara Institute of Engineering, Gujarat Technological University, Vadodara, Gujarat, India

Downloads

Published

2018-06-12

Issue

Vol. 7 No. 3 (2017)

Section

Articles

License

Declaration and Copyright Transfer Form

(to be completed by authors)

I/ We, the undersigned author(s) of the submitted manuscript, hereby declare, that the above manuscript which is submitted for publication in the STM Journals(s), is not published already in part or whole (except in the form of abstract) in any journal or magazine for private or public circulation, and, is not under consideration of publication elsewhere.

  • I/We will not withdraw the manuscript after 1 week of submission as I have read the Author Guidelines and will adhere to the guidelines.
  • I/We Author(s ) have niether given nor will give this manuscript elsewhere for publishing after submitting in STM Journal(s).
  • I/ We have read the original version of the manuscript and am/ are responsible for the thought contents embodied in it. The work dealt in the manuscript is my/ our own, and my/ our individual contribution to this work is significant enough to qualify for authorship.
  •  I/We also agree to the authorship of the article in the following order:

Author’s name                                    

 

1. ________________

2. ________________

3. ________________

4. ________________

 

We  Author(s) tick this box and would request you to consider it as our signature as we agree to the terms of this Copyright Notice, which will apply to this submission if and when it is published by this journal.