Mechanical and Micro-structural Properties of Friction Stir Welded Dissimilar Joints of Aluminium Alloys

Authors

  • khushdeep goyal

Keywords:

Friction sir welding, aluminium alloys, tensile strength, micro-hardness, mechanical properties

Abstract

Abstract In this work, the microstructure and mechanical properties of friction stir welded dissimilar joints of 6101-to-6063 aluminium alloys were evaluated. Tool with round pin profile was fabricated of high speed steel material which was suitable for friction stir welding of aluminium alloys. Under monotonic tensile loading, an increase in the joint strength was observed with the increase in the tool rotational speed. The micro-hardness of friction stir zone increased with increase in tool rotational speed while the micro-hardness of friction stir zone increased as the welding speed decreased. The heat effected microstructure showed uniform and dense weld zone without any defect. It was observed that the weld material was defect free.

Downloads

Published

2019-04-25

Issue

Vol. 7 No. 2 (2017)

Section

Articles

License

Declaration and Copyright Transfer Form

(to be completed by authors)

I/ We, the undersigned author(s) of the submitted manuscript, hereby declare, that the above manuscript which is submitted for publication in the STM Journals(s), is not published already in part or whole (except in the form of abstract) in any journal or magazine for private or public circulation, and, is not under consideration of publication elsewhere.

  • I/We will not withdraw the manuscript after 1 week of submission as I have read the Author Guidelines and will adhere to the guidelines.
  • I/We Author(s ) have niether given nor will give this manuscript elsewhere for publishing after submitting in STM Journal(s).
  • I/ We have read the original version of the manuscript and am/ are responsible for the thought contents embodied in it. The work dealt in the manuscript is my/ our own, and my/ our individual contribution to this work is significant enough to qualify for authorship.
  •  I/We also agree to the authorship of the article in the following order:

Author’s name                                    

 

1. ________________

2. ________________

3. ________________

4. ________________

 

We  Author(s) tick this box and would request you to consider it as our signature as we agree to the terms of this Copyright Notice, which will apply to this submission if and when it is published by this journal.