Capacitance–Resistance Model Application to Reservoirs Primarily Under Aquifer Influx
Keywords:
Capacitance-resistance., waterflooding., interwell connectivity., oil reservoirs.Abstract
Previous Capacitance – Resistance Models that have been developed to characterise black oil reservoirs undergoing waterflooding do not apply to waterflooding of reservoirs primarily under aquifer influxresulting in significant error. This paper has attempted to overcome this limitation by presenting the aquifer influx as a pseudo injector whose injection rate is represented by an existing aquifer model.
The influencing parameters of the model have been modified to include an aquifer influx factor. The equation was developed from the mass balance equation into a partial differential equation which included the reservoir connectivity parameters. The developed equation was solved based on assumption of linear variation in injection rate and bottom hole pressure as a single producer, n+1 injectors’ reservoir system. The Leung’s modified pseudo steady state aquifer model was incorporated as the aquifer influx factor into the final equation. A stand-alone software was developed for the computation and validation of the developed model. The model was validated by establishing the interwell connectivity over part of the historical data and then using the fitted model to predict the other part of the data.
Comparison of this study to the existing models indicated error margin decline towards the end of the production table where the aquifer influx rate is much lower indicating the importance of the addition of the aquifer influx factor.This model is accurate and proves to be a simple and useful tool in waterflood planning and monitoring and general reservoir characterisation.References
Altaheini, S., Al-Towijri, A., & Ertekin, T. (2016). Introducing a new capacitance-resistance model and solutions to current modeling limitations. In Society of Petroleum Engineers - SPE Annual Technical Conference and Exhibition, ATCE 2016 (Proceedings - SPE Annual Technical Conference and Exhibition; Vol. 2016-January). Society of Petroleum Engineers (SPE).
Altaheini S. 2015. Addressing capacitance resistance modelling limitation and introducing a new practical formulation, Master Thesis, Energy and Mineral Engineering, Turgay Ertekin, Thesis Advisor/Co-Advisor
Fetkovich M. J. 1971. A simplified approach to water influx calculations – Finite aquifer systems. Doi: https://doi.org/10.2118/2603-PA.
Hurst W. 1942. Water influx into a reservoir and its applications to the equations of volumetric balance. Doi: https://doi.org/10.2118/943057-G
Leung W. F. 1986. A fast convolution method for implementing single porosity finite/infinite aquifer models for water influx calculations. Doi: https://doi.org/10.2118/12276-PA
Marques J. B., Trevisan O. V. and Suslick S. B. 2007. Classic models of calculation of influx: A Comparative study.Doi: https://doi.org/10.2118/107265-MS
Smith J. T. and Cobb W. M. 1997. Waterflooding, William M. Cobb & Associates, Inc. 12770 Coit Road, Suite 907 Dallas, TX 75251
A. A. Al-Yousef, “Investigating Statistical Techniques To Infer Interwell Connectivity From Production and Injection Rate Fluctuations,” PhD Thesis, The University of Texas, Austin, 2006.
Yousef A. A., Gentil P., Jensen J. L. and Lake L. W. 2005. A capacitance model to infer the interwell connectivity from production and injection rate fluctuations. DOI: https://doi.org/10.2118/95322-PA
A.F. Van Everdingen, W. Hurst 1949. The Application of the Laplace Transformation to Flow Problems in Reservoirs, Doi: https://doi.org/10.2118/949305-G
Carter, R.D. and Tracy, G.W. 1960. An Improved Method for Calculating Water Influx. Trans., AIME 219: 415.
C.R. Mcewen, 1962. Material Balance Calculations with Water Influx in the Presence of Uncertainty in Pressures, Doi: https://doi.org/10.2118/225-PA
Downloads
Published
Issue
Section
License
Declaration and Copyright Transfer Form
(to be completed by authors)
I/ We, the undersigned author(s) of the submitted manuscript, hereby declare, that the above manuscript which is submitted for publication in the STM Journals(s), is not published already in part or whole (except in the form of abstract) in any journal or magazine for private or public circulation, and, is not under consideration of publication elsewhere.
- I/We will not withdraw the manuscript after 1 week of submission as I have read the Author Guidelines and will adhere to the guidelines.
- I/We Author(s ) have niether given nor will give this manuscript elsewhere for publishing after submitting in STM Journal(s).
- I/ We have read the original version of the manuscript and am/ are responsible for the thought contents embodied in it. The work dealt in the manuscript is my/ our own, and my/ our individual contribution to this work is significant enough to qualify for authorship.
- I/We also agree to the authorship of the article in the following order:
Author’s name
1. ________________
2. ________________
3. ________________
4. ________________
| We Author(s) tick this box and would request you to consider it as our signature as we agree to the terms of this Copyright Notice, which will apply to this submission if and when it is published by this journal. |