Development of Graphene Based Super Strong and Thermal Resistant High Nano Composite Materials

Authors

  • Hoshiyar Singh Student of Department of Mechanical Engineering, Amity University Gurugram, Manesar, Haryana, India
  • Sanjeev Sharma Associate Professor and(HOD) of Mechanical Engineering, Amity University Gurugram, Manesar, Haryana, India
  • PB Sharma Professor and Vice Chancel,Amity University Gurugram, Manesar, Haryana, India

Keywords:

Aluminium, Heat treatment, Compaction, sintering, Accumulative Roll Bonding, SPD .

Abstract

The main goals of the research is to present the investigation in graphene based  super strong and thermal resistant nano composite material and study their structural and mechanical properties after intensive severe plastic deformation. It is observed that the mechanical properties of graphene based super strong Nano composite materials show an intensive severe plastic deformation as accumulative roll bonding process was changed. Severe plastic deformation refined grains in the aluminium alloy and increased its mechanical properties.

References

Sanjeev Sharma, RudraPratap Singh, and Surender Kumar “Development of Nano-StructuredMetals Processed by Severe Plastic Deformation” Indian Journal of Science and Technology, Vol9 (27), D10.17485/ijst/2016/v9i27/94379, July 2016

Padhi, A.K., “Metal graphene with Nano composite enhanced mechanical properties” in 2014.

Valiev RZ, Islamgaliev RK., “Nano materials by severe plastic deformation”. Progr Mater Sci. 2000; 45(1):103-89.

Klassen T, Bohn R, Fanta G, Oelerich W, Eigen N, Gartner F, Aust E, Bormann R, Kreye H, Metellkd Z., “Bulk Nano-structured metals by Severe Plastic Deformation (SPD)”. NSTI-Nanotech. 2003; 94(2):610-4.

Skipnyuk M, Rabkin E, Estrin Y, Lapovok L., “Bulk Nano-structured metals by Severe Plastic Deformation”. AdvanceMater. 2004; 52(1-5):405-14.

Zehetbauer MJ, Krystian M, Lacom W., “Inorganic nanow-ires and metallic Nano structures”. NSTI-Nanotech. 2005; 2(4):642-5.

Monfared V, Fazaeli D, Daneshmand S, Shafaghatian N., “Simulation of elasto-plastic deformations in composites by flow rules”. Indian Journal of Science and Technology. 21 Jan; 7(2). Doi no:10.17485/ijst/2014/v7i2/47682

Karthikraja S, Sasthika P, Nandakumar A, Santhanakumar M, Deventhiran K. “Deformation characteristics of glass fibre reinforced polymer-wrapped axially loaded short circular HSC column”. Indian Journal of Science and Technology.2016Apr; 9(16).Doi no:10.17485/ijst/2016/v9i16/92228.

Zehhetbaur M, Krystian M, Lacom W., “BalkNano-structured metals by severe plastic deformation”. Available from:http://www.nsti.org/publications/nanotech/2005/pdf/698.

. Chen ZJ, Liu Q, Wang GJ, Wang DM., “Deformation in homogeneities of Mg-Al laminated metals composites fabricated by accumulative roll bonding”. Material Research Innovation. 2015; 19(1):147-51.

Downloads

Published

2020-08-31

Issue

Vol. 10 No. 2 (2020)

Section

Articles

License

Declaration and Copyright Transfer Form

(to be completed by authors)

I/ We, the undersigned author(s) of the submitted manuscript, hereby declare, that the above manuscript which is submitted for publication in the STM Journals(s), is not published already in part or whole (except in the form of abstract) in any journal or magazine for private or public circulation, and, is not under consideration of publication elsewhere.

  • I/We will not withdraw the manuscript after 1 week of submission as I have read the Author Guidelines and will adhere to the guidelines.
  • I/We Author(s ) have niether given nor will give this manuscript elsewhere for publishing after submitting in STM Journal(s).
  • I/ We have read the original version of the manuscript and am/ are responsible for the thought contents embodied in it. The work dealt in the manuscript is my/ our own, and my/ our individual contribution to this work is significant enough to qualify for authorship.
  •  I/We also agree to the authorship of the article in the following order:

Author’s name                                    

 

1. ________________

2. ________________

3. ________________

4. ________________

 

We  Author(s) tick this box and would request you to consider it as our signature as we agree to the terms of this Copyright Notice, which will apply to this submission if and when it is published by this journal.