Design of Power Line Management System Using Power Line Communication for Home Appliances
Abstract
Home power utilization has a tendency to develop in the extent to the increment in the quantity of expansive measured electric home appliances. An installed system with no new additional wiring has been made for home power the board. By utilizing Power Line Communication (PLC) innovation, electric home appliances can be controlled and monitored through household power lines. We portray a PLC modem that coordinates the different AC power attachments, the PLC modem, and a microcontroller into an electrical plug to switch the power of the attachments ON/OFF. The framework uses existing force lines to send the information to a particular node or to broadcast to different power line nodes. The address is allocated to every receiver and its response is focused around their appropriate commands. The receiver will project the inforrmation and can also be used to control it. This framework empowers the client to control the on/off and the power utilization remotely without pestering with additional wiring. Tera Term software supports the plug-in mechanism and allows creating many useful extensions to the application such as Serial port connections, TCP/IP (telnet, SSH1, SSH2) connections. The framework is exceptionally advantageous and can be utilized by simply connecting it to.
References
Galli, S.; Scaglione, A. “The Role of Power Line Communications in the Smart Grid”. Proc. IEEE 2011, 99, 998–1027.
Chia-Hung Lien, Chi-Hsiung Lin, "Remotely Controllable Outlet System for Home Power Management," in Proc. ISCE '06, pp. 1–6, 2006.
Kharraz, M.A.O.; Lavenu, C,. Serhir, M, “Characterization of the input impedance of household appliances in the FCC frequency band”. In Proc. IEEE 2017 97, 1–6.
Swarupa Rani D, N Dinesh Kumar, PA Harsha vardhini, "Post-correction of analog-to-digital converter for different input signals", Vol 8, Issue 3 (Feb, 2019), International Journal of Engineering and Advanced Technology, pp No: 45–49, ISSN: 2249-8958(Online)
N Dinesh Kumar, M Priyanka “Library and Auditorium Electrical Appliances Automation”, Vol 7, Issue 1, (Jan 2016), Journal of Electronic Design Technology, Pg No 1–8. ISSN: 2321-4228
N Dinesh Kumar, K Siva Kumar, “Design and Implementation of Smart house using LabVIEW" Vol 6, Issue 2(2016), Current Trends in Information Technology, pp No: 5-13, ISSN: 2348 – 7895
Masahiro Inoue, Toshiyasu Higuma, Yoshiaki Ito, Noriyuki Kushiro and Hitoshi Kubota, "Network Architecture for Home Energy Management System," IEEE Trans 2003, 49,pp. 606–613.
H. Ikebe, K. Ogawa, H. Takernura and Y. Hatayama, "New architecture of realizing seamless connectivity and cooperative control for home network systems," in Proc. ISCAS '2005,7, pp. 5341–5344.
S.T. Wang, R.M. Yuan, Z.J. Sun. “The Technology of Low Voltage Power Line Carrier and Its Implementation in Automated Meter Reading System”, Electrical Measuring and Instrumentation,2008, 3, pp. 31–34.
H.L. Zhang, M.J. Jia, Z.C. Yue, H. Zhang. “The Development and Using of Power Line Carrier Technology at Home and Abroad”, Power System Technology, 2006, pp. 646–652.
M. Zimmermann and K. Dostert, “Analysis and Modeling of Impulsive Noise in Broadband Powerline Communications,”IEEE Trans. Elecfromugn. Compat 2002, 44, pp. 249-258.
H.L. Zhang, M.J. Jia, Z.C. Yue, H. Zhang. “The Development and Using of Power Line Carrier Technology at Home and Abroad”, Power System Technology, 2006, pp. 646–652
N Dinesh Kumar, P Pavan Kumar, M Anusha, “Design and Implementation of Power Line Communication”, Vol 9, No. 23, (Dec 2014), International Journal of Applied Engineering Research (IJAER), Page No: 23269-23284 ISSN 0973-4562
Downloads
Published
Issue
Section
License
Journal Title:
Title of the Paper:
Corresponding Author’s Information:
Name: Address:
E-mail:
Contact Number:
It is herein agreed that: The copyright to the above-listed unpublished and original article is transferred to STM Journals.
This copyright transfer covers the exclusive right to reproduce and distribute the contribution, including reprints, translations, photographic reproductions, microform, electronic form (offline, online), or any other reproductions of similar nature.
I/We declare that above manuscript is not published already in part or whole (except in the form of abstract) in any journal or magazine for private or public circulation, and, is not under consideration of publication elsewhere.
I/ We warrant(s) that his/her/their contribution is original, except for such excerpts from copyrighted works as may be included with the permission of the copyright holder and author thereof, that it contains no libelous statements, and does not infringe on any copyright, trademark, patent, statutory right, or propriety right of others.
I/We will not publish his/her/their above said contribution anywhere else without the prior written permission of the publisher unless it has been changed substantially. I/We also agree to the authorship of the article in the following order: Author(s) Name Signature(s)
1. ________________
2. ________________
3. ________________
4. ________________
The author(s) agree to the terms of this Copyright Notice, which will apply to this submission if and when it is published by this journal (comments if any to the editor can be added below).