Design and Development of Electric Two-Wheeler

Authors

  • Sukhadip Chougule Professor, Department of Mechanical Engineering, Pimpri Chinchwad College of Engineering and Research, Pimpri-Chinchwad, Maharashtra, India
  • Sohan Patil Student, Department of Mechanical Engineering, Pimpri Chinchwad College of Engineering and Research, Pimpri-Chinchwad, Maharashtra, India http://orcid.org/0000-0002-9960-6832
  • Prathmesh Lotekar Student, Department of Mechanical Engineering, Pimpri Chinchwad College of Engineering and Research, Pimpri-Chinchwad, Maharashtra, India
  • Durgesh Limbhore Student, Department of Mechanical Engineering, Pimpri Chinchwad College of Engineering and Research, Pimpri-Chinchwad, Maharashtra, India
  • Rohit Vhatkar Student, Department of Mechanical Engineering, Pimpri Chinchwad College of Engineering and Research, Pimpri-Chinchwad, Maharashtra, India

Keywords:

Electric Vehicle, Chassis, Battery, GSM module, lead-acid

Abstract

Presently, the fuel can exceed just for a particular period and it also becomes costlier and creates environmental issues. Due to these constraints, alternate fuels and other source of energy like solar, wind, etc. bringing car industry to subsequent level. Also, the electrical vehicles are developing rapidly. The electricity stored during a rechargeable battery, which provides power to electric motor and this power helps in propulsion of motorcycle. This study is aimed to developing frame of a two-seater motorcycle, whereas considering strength, safety, optimum performance of vehicle. The said study has been administered with a two-step approach. the primary step includes modelling considering aesthetic point of view as well as determination of loads working on frame. The second step is about stress analysis using FEA software and style modifications for weight reduction without affecting structural strength. we propose an answer to Vehicle Security problem by employing a fingerprint authenticated vehicle starting system by using Arduino UNO. The biometric system provides a secure and hassle-free access to start/stop the motor and therefore the system only allows authorized users to start the vehicle. Additionally, The GSM Module is connected via telephonic network with vehicle owner. Motor Controller are often started/stopped by sending a SMS to GSM Module.

References

Advani K, Sarvaiya M, Vaishnav A, et al. Development & Analysis of electric load carrier or personal mobility vehicle. ResearchGate. 2016; 7(1).

Vignesh M, Arumugam K, Vinoth S. Design and Analysis Of frame For an Electric Bike. IJESI. 2019; 8(1):8-16.

Paningipalli PS, Sayyad FB. Theoretical and Experimental validation Of Bike Chassis for Weight Reduction. 2016; 5(10).

Tsourveloudis NC, Akis GK. Design and Development Prototype Electrical Vechicles Chassis. 7th Beta CAE International Conference.

Santosh H, Lakhan R. Modal Analysis Of two-wheeler chassis. IRESRT. 2016; 5.

Jeyakanthan SK, Sudharshan V. Design and Fabrication of Self Charging Electric Vehicle. 2017; 6(9).

HPWizard.com. Tire friction and rolling resistance coefficients. Available from http://hpwizard.com/tire-friction-coefficient.html. Accessed 06 April 2020.

softschools.com. Stopping Distance Formula. Available from https:// softschools.com/formulas/physics/stopping_distance-formula/89/. Accessed 06 April 2020.

Downloads

Published

2020-06-17

Issue

Vol. 10 No. 1 (2020)

Section

Articles

License

Declaration and Copyright Transfer Form

(to be completed by authors)

I/ We, the undersigned author(s) of the submitted manuscript, hereby declare, that the above manuscript which is submitted for publication in the STM Journals(s), is not published already in part or whole (except in the form of abstract) in any journal or magazine for private or public circulation, and, is not under consideration of publication elsewhere.

  • I/We will not withdraw the manuscript after 1 week of submission as I have read the Author Guidelines and will adhere to the guidelines.
  • I/We Author(s ) have niether given nor will give this manuscript elsewhere for publishing after submitting in STM Journal(s).
  • I/ We have read the original version of the manuscript and am/ are responsible for the thought contents embodied in it. The work dealt in the manuscript is my/ our own, and my/ our individual contribution to this work is significant enough to qualify for authorship.
  •  I/We also agree to the authorship of the article in the following order:

Author’s name                                    

 

1. ________________

2. ________________

3. ________________

4. ________________

 

We  Author(s) tick this box and would request you to consider it as our signature as we agree to the terms of this Copyright Notice, which will apply to this submission if and when it is published by this journal.