Research Paper on Design Analysis of Bucket of JCB 3dx Model

Authors

  • Vishwesh Shailendra Bhosale U.G. Student, Department of Mechanical Engineering, KIT’s college of Engineering ,Kolhapur, Maharashtra , India
  • Pranav Satish Pakale U.G. Student, Department of Mechanical Engineering, KIT’s college of Engineering ,Kolhapur, Maharashtra , India
  • Rushikesh Suryakant Patil U.G. Student, Department of Mechanical Engineering, KIT’s college of Engineering ,Kolhapur, Maharashtra , India
  • Vasim Salim Bagwan U.G. Student, Department of Mechanical Engineering, KIT’s college of Engineering ,Kolhapur, Maharashtra , India
  • Prathamesh Ramesh Patil U.G. Student, Department of Mechanical Engineering, KIT’s college of Engineering ,Kolhapur, Maharashtra , India
  • Pravin Sambhaji Gosavi Associate Professor, Department of Mechanical Engineering, KIT’s college of Engineering, Kolhapur, Maharashtra, India.

Keywords:

bucket, backhoe, digging, structure, jcb 3dx.

Abstract

JCB machines principal functions are Digging (material removing), Ground leveling and material transport operations. Backhoe attachment is rear part of Excavator machine. The backhoe attachment is subjected to static as well as dynamic forces. Because of several working conditions, Excavator parts, like bucket, arm, and boom are subjected to high loads .Thus, it is necessary to provide a better design of parts having maximum reliability, keeping design safe under loading conditions.
Excavator is very importance member of earth moving equipment family. Excavator bucket is very crucial element of it. So it should has sufficient load sustainable capacity for long working life, because it is cost too. Our main aim is to analyze excavator bucket based of different load condition for safe design. Excavators of JCB are heavy earth moving equipment’s that are equipped with different types of buckets that are useful in various excavation projects. A excavator bucket is a digging attachment connected to an dipper stick of an Excavator. Its purpose is to dig the earth. The buckets are hydraulically controlled. Excavator buckets come in different shapes, sizes and types and each bucket has its own use depending on where it is digging. . JCB bucket or Excavator bucket is made of high quality iron metal such as MS or SS that helps in digging and excavation at various construction sites. Excavator buckets are also used in conventional trenching methods for laying pipelines and also used for digging trial pits for geotechnical investigation. Different situations has different purposes of digging. For that, analysis of bucket is important.

References

Backhoe loader (2021).Wikipedia. Available at https://en.wikipedia.org/wiki/backhoe_loader (Accessed: 15 March 2021)

Sekhar K.Guna, Kumar P. Dileep. Design and Analysis of an Excavator Bucket. IJMETMR. 2017;4(5):674-83.

Shaik Meeravali, Murthy M. Sri Rama. Analysis of Excavator Bucket Using Ansys.International Journal for Scientific Research & Development (IJSRD).2020;6(5):208-211.

Lomate S, Biradar S, Dhumal K, et al. Design and shape optimization of excavator bucket. International Research Journal of Engineering and Technology (IRJET). 2016;3(08):1423-9.

Patel BP, Prajapati JM. Evaluation of bucket capacity, digging force calculations and static force analysis of mini hydraulic backhoe excavator. machine design. 2012;4(1):59-66.

https://www.mtladv.com/wp-content/uploads/2016/01/151_HARDOX_400_UK_Data-Sheet.pdf

https://www.mtladv.com/wp-content/uploads/2016/01/168_HARDOX_450_UK_Data-Sheet.pdf

Metin Ozdogan. Digging Forces Of Hydraulic Backhoes. ResearchGate. 2019.

Thombarer Akash V., Dudhe Suved V., Wankhade, Snehal K., Deshmukh C. G. Shape Optimization of an Excavator Bucket with the Help of ANSYS Software. International Research Journal of Engineering and Technology(IRJET).2021;8(3):378-83.

https://www.google.com/aclk?sa=l&ai=DChcSEwjKkfnrm4LwAhUGdmAKHWzqAv0YABAAGgJ0bQ&ae=2&sig=AOD64_1uY1pkc_UhgMvTld9L2q4S2y7spw&q&adurl&ved=2ahUKEwj10O3rm4LwAhWxoekKHdiZA9EQ0Qx6BAgDEAE.

Downloads

Published

2021-05-06

Issue

Vol. 11 No. 1 (2021)

Section

Articles

License

Declaration and Copyright Transfer Form

(to be completed by authors)

I/ We, the undersigned author(s) of the submitted manuscript, hereby declare, that the above manuscript which is submitted for publication in the STM Journals(s), is not published already in part or whole (except in the form of abstract) in any journal or magazine for private or public circulation, and, is not under consideration of publication elsewhere.

  • I/We will not withdraw the manuscript after 1 week of submission as I have read the Author Guidelines and will adhere to the guidelines.
  • I/We Author(s ) have niether given nor will give this manuscript elsewhere for publishing after submitting in STM Journal(s).
  • I/ We have read the original version of the manuscript and am/ are responsible for the thought contents embodied in it. The work dealt in the manuscript is my/ our own, and my/ our individual contribution to this work is significant enough to qualify for authorship.
  •  I/We also agree to the authorship of the article in the following order:

Author’s name                                    

 

1. ________________

2. ________________

3. ________________

4. ________________

 

We  Author(s) tick this box and would request you to consider it as our signature as we agree to the terms of this Copyright Notice, which will apply to this submission if and when it is published by this journal.