A Review on Process Parameter Optimization of TIG Welding of SS316

Authors

  • Hiren Padhiyar CAD/CAM, A.I.T.S, Rajkot, Gujrat, India
  • Manhar S Kagathra CAD/CAM, A.I.T.S, Rajkot, Gujrat, India
  • GD Acharya CAD/CAM, A.I.T.S, Rajkot, Gujrat, India

DOI:

https://doi.org/10.37591/joprm.v5i3.7191

Keywords:

TIG, parameter, tensile strength

Abstract

In this audit paper the creator needs to decide the effect of different welding parameters on the weld dot of SS316 welded joint. In this examination the diverse method is utilized to upgrade the distinctive welding parameters like speed, current, gas stream rate on the quality of the material. The outcome demonstrates that speed is the best variable to have most noteworthy twist quality; and current is utilized to get higher rigidity.

 

 

References

Kiaee N, Aghaie-Khafri M. Optimization of Gas Tungsten Arc Welding Process by Response Surface Methodology.

Anand Rao V, Deivanathan R. Experimental Investigation for Welding Aspects of Stainless Steel 310 for the Process of TIG Welding.

Juang SC, Tarng YS. Process Parameter Selection for Optimizing the Weld Pool Geometry in the Tungsten Inert Gas Welding of Stainless Steel.

Bharath P, Sridhar VG, Senthilkumar M. Optimization of 316 Stainless Steel Weld Joint Characteristics using Taguchi Technique.

Patel Chandresh N, Sandip Chaudhary. Parametric Optimization of Weld Strength of Metal Inert Gas Welding and Tungsten Inert Gas welding By Using Analysis of Variance and Grey Relational Analysis.

Ahmed Khalid Hussain, Abdul Lateef, Mohd. Javed, et al. Influence of Welding Speed on Tensile Strength of Welded Joint in TIG Welding Process.

Kishore K, Gopal Krishna PV, Veladri K. Analysis of Defects in Gas Welding Arc Welding of AISI1040 Steel Using Taguchi Method.

Tarng YS. Process Parameter Selection for Optimizing the Weld Pool Geometry in the Tungsten Inert Gas Welding of Stainless Steel.

Nirmalendhu Choudhury, Asish Bandyopadhyay, Ramesh Rudrapati. Design Optimization of Process Parameters for TIG Welding based on Taguchi Method.

Sudhakaran R, Velmurugan V, Sivasakthivel PS. Optimization of Process Parameters to Minimize Angular Distortion in Gas Tungsten Arc Welded Stainless Steel 202 Grade Plates Using Particle Swarm Optimization

Downloads

Published

2023-07-27

Issue

Vol. 5 No. 3 (2015)

Section

Articles

License

Declaration and Copyright Transfer Form

(to be completed by authors)

I/ We, the undersigned author(s) of the submitted manuscript, hereby declare, that the above manuscript which is submitted for publication in the STM Journals(s), is not published already in part or whole (except in the form of abstract) in any journal or magazine for private or public circulation, and, is not under consideration of publication elsewhere.

  • I/We will not withdraw the manuscript after 1 week of submission as I have read the Author Guidelines and will adhere to the guidelines.
  • I/We Author(s ) have niether given nor will give this manuscript elsewhere for publishing after submitting in STM Journal(s).
  • I/ We have read the original version of the manuscript and am/ are responsible for the thought contents embodied in it. The work dealt in the manuscript is my/ our own, and my/ our individual contribution to this work is significant enough to qualify for authorship.
  •  I/We also agree to the authorship of the article in the following order:

Author’s name                                    

 

1. ________________

2. ________________

3. ________________

4. ________________

 

We  Author(s) tick this box and would request you to consider it as our signature as we agree to the terms of this Copyright Notice, which will apply to this submission if and when it is published by this journal.