Feasibility Studies on Cement Mortar Replaced with Ceramic Tile Waste as Secondary Binder
Abstract
This paper presents the results of experimental works focused on replacement of ceramic waste materials with cement in the production of cement mortar. The aim of this research work is to find the optimum percentage replacement of cement by ceramic tile waste in percentage replacement (5 to 25, 50 and 100%) mortar mixes. The ceramic waste tiles are mechanically crushed down ultrafine ceramic waste (UCW) powder passing 600 μ and replaced with cement in cement mortars. The results demonstrate that recycled eco-friendly cement ceramic mortar gives higher mechanical properties than conventional cement mortar. The strength and durability parameters shows positive values higher than CM (Cement Mortar) mix at 20% replacement and density lower as the replacement level increase.
Keywords: Ceramic waste tiles, ultrafine ceramic waste (UCW), compressive strength, density
Downloads
Published
Issue
Section
License
Declaration and Copyright Transfer Form
(to be completed by authors)
I/ We, the undersigned author(s) of the submitted manuscript, hereby declare, that the above manuscript which is submitted for publication in the STM Journals(s), is not published already in part or whole (except in the form of abstract) in any journal or magazine for private or public circulation, and, is not under consideration of publication elsewhere.
- I/We will not withdraw the manuscript after 1 week of submission as I have read the Author Guidelines and will adhere to the guidelines.
- I/We Author(s ) have niether given nor will give this manuscript elsewhere for publishing after submitting in STM Journal(s).
- I/ We have read the original version of the manuscript and am/ are responsible for the thought contents embodied in it. The work dealt in the manuscript is my/ our own, and my/ our individual contribution to this work is significant enough to qualify for authorship.
- I/We also agree to the authorship of the article in the following order:
Author’s name
1. ________________
2. ________________
3. ________________
4. ________________
| We Author(s) tick this box and would request you to consider it as our signature as we agree to the terms of this Copyright Notice, which will apply to this submission if and when it is published by this journal. |