Comparative Study of Strength of Normal Beam and Strength of Glass Fibre Wrapped Beam

Authors

  • Rahul Diliprao Rakshe Shreeyash College of engineering and technology, aurangabad

DOI:

https://doi.org/10.3759/rtcet.v8i2.1123

Abstract

In the present work, strength of normal beam is compared with strength of glass fibre wrapped beam to check efficiency of glass fibre wrapping in earthquake prone areas. There are several methods which can be used efficiently in the re-strengthening of RCC members such as fibre reinforced polymer wrapping, by using steel strips at various spacings to increase member strength and from increasing the existing member dimensions or sizes by reinforcing the existing member again. But from increasing sizes of the existing members, it renders to be costly and also time consuming, therefore there are two techniques which are efficiently used,which are FRP wrapping and steel strip wrapping. FRP wrapping is cost efficient and also less time consuming compared to other processes.

 

References

Lau KT, Zhou LM. The Mechanical Behaviour of Composite Wrapped Concrete Cylinders Subjected to Uniaxial Compression Load. Compos Struct.2001; 52(2): 189–198p.

Sliva MAG, Rodrigues CC. Size and Relative Stiffness Effects on Compressive Failure of Concrete Columns Wrapped with Glass FRP. J Mater Civ Eng, ASCE. 2006;18(3): 334–342p.

Benzaid R, Chikh Nasr-Eddine,Mesbah H. Behaviour of Square Concrete Column Confined with GFRP Composite Wrap. J Civ EngManag. 2008; 14(2): 115–120p.

Shamim Sheikh A,Yau G. Seismic Behaviour of Concrete Columns with Steel and Fibre Reinforced Polymers. ACI Struct J.2002; 99(1): 72–80p.

Mander JB, Priestley MJN, Park R. Theoretical Stress-Strain Model for Confined Concrete.J Struct Eng. 1988; 114(8): 1804–1826p.

Wang YC, Restrepo JI. Investigation of Concentrically Loaded Reinforced Concrete Columns Confined with Glass Fiber-Reinforced Polymer Jackets. ACI Struct J. 2001; 98(3): 377–385p.

Hollaway LC, Teng JG,editors. Strengthening and Rehabilitation of Civil Infrastructures Using Fibre-Reinforced Polymer (FRP) Composites. Cambridge: Woodhead Publ. Ltd a. CRC Press LLC;2008.

Externally Bonded FRP Reinforced for RC Structures. Technical Report on the Design and Use of Externally Bonded Fibre Reinforced Polymer Reinforcement (FRP EBR) for Reinforced Concrete Structures. Fib Bulletin; 2001.

Rai GL.Different Strengthening Techniques for RC Columns. R&M International Pvt. Ltd.

Downloads

Published

2018-08-07

Issue

Vol. 8 No. 2 (2018)

Section

Research Article

License

Declaration and Copyright Transfer Form

(to be completed by authors)

I/ We, the undersigned author(s) of the submitted manuscript, hereby declare, that the above manuscript which is submitted for publication in the STM Journals(s), is not published already in part or whole (except in the form of abstract) in any journal or magazine for private or public circulation, and, is not under consideration of publication elsewhere.

  • I/We will not withdraw the manuscript after 1 week of submission as I have read the Author Guidelines and will adhere to the guidelines.
  • I/We Author(s ) have niether given nor will give this manuscript elsewhere for publishing after submitting in STM Journal(s).
  • I/ We have read the original version of the manuscript and am/ are responsible for the thought contents embodied in it. The work dealt in the manuscript is my/ our own, and my/ our individual contribution to this work is significant enough to qualify for authorship.
  •  I/We also agree to the authorship of the article in the following order:

Author’s name                                    

 

1. ________________

2. ________________

3. ________________

4. ________________

 

We  Author(s) tick this box and would request you to consider it as our signature as we agree to the terms of this Copyright Notice, which will apply to this submission if and when it is published by this journal.